SMD-5962-90574

DLA - CC - DLA Land and Maritime

MICROCIRCUITS, DIGITAL, HIGH SPEED CMOS, 8-BIT SYNCHRONOUS BCD DOWN COUNTER, TTL, COMPATIBLE, MONOLITHIC SILICON

Organization:

Year: 1990

Abstract: This drawing describes device requirements for class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices".
The complete part number shall be as shown in the following example:

The device type shall identify the circuit function as follows:

         Device type       Generic number                       Circuit function                01              54HCT40102           8-bit synchronous BCD down counter, TTL                                                    compatible inputs

The case outline shall be as designated in appendix C of MIL-M-38510, and as follows:

     Outline letter                                  Case outline           E                     D-2 (16-lead, .840" × .310" × .200"), dual-in-line package

       Supply voltage range. (V_CC)  - - - - - - - - -   −0.5 V dc to +7.0 V dc         DC input voltage range - - - - - - - - - - - -   −0.5 V dc to V_CC + 0.5 V dc         DC output voltage range- - - - - - - - - - - -   −0.5 V dc to V_CC + 0.5 V dc         DC input diode current - - - - - - - - - - - -   ±20 mA         DC output diode current (per pin)  - - - - - -   ±20 mA         DC drain current (per pin)   - - - - - - - - -   ±25 mA         DC V_CC or GND current  - - - - - - - - - - - -   ±50 mA         Storage temperature range  - - - - - - - - - -   −65°C to +150°C         Maximum power dissipation (P_D) - - - - - - - -   500 mW  2/         Lead temperature (soldering, 10 seconds) - - -   +300°C         Thermal resistance, junction-to-case (θ_JC) - -   See MIL-M-38510, appendix C         Junction temperature (T_J)  - - - - - - - - - -   +175°C

       Supply voltage range (V_CC) - - - - - - - -    +4.5 V dc to +5.5 V dc         Input voltage range (V_IN)  - - - - - - - -    0.0 V dc to V_CC         Output voltage range (V_OUT)  - - - - - - -    0.0 V dc to V_CC         Case operating temperature range (T_C)- - -    −55°C to +125°C         Input rise or fall time (t_r, t_f):          V_CC = 4.5 V  - - - - - - - - - - - - - -    0 to 500 ns         Maximum CP frequency (f_MAX):          T_C = +25°C, V_CC = 4.5 V  - - - - - - - -    14 MHz          T_C = −55°C to +125°C, V_CC = 4.5 V  - - -     9 MHz         Minimum pulse width, [M bar][R bar], CP (t_w1):          T_C = +25°C, V_CC = 4.5 V  - - - - - - - -    35 ns          T_C = −55°C to +125°C, V_CC = 4.5 V  - - -    53 ns         Minimum pulse width, [P bar][L bar] (t_w2):          T_C = +25°C, V_CC = 4.5 V  - - - - - - - -    38 ns          T_C = −55°C to +125°C, V_CC = 4.5 V  - - -    57 ns         Minimum removal time, [M bar][R bar] to CP (t_rem):          T_C = +25°C, V_CC = 4.5 V  - - - - - - - -    10 ns          T_C = −55°C to +125°C, V_CC = 4.5 V  - - -    15 ns         Minimum setup time, Pn to CP (t_s1):          T_C = +25°C, V_CC = 4.5 V  - - - - - - - -    24 ns          T_C = −55°C to +125°C, V_CC = 4.5 V  - - -    36 ns         Minimum setup time, [P bar][E bar] to CP (t_s2):          T_C = +25°C, V_CC = 4.5 V  - - - - - - - -    20 ns          T_C = −55°C to +125°C, V_CC = 4.5 V  - - -    30 ns         Minimum setup time, [T bar][E bar] to CP (t_s3):          T_C = +25°C, V_CC = 4.5 V  - - - - - - - -    40 ns          T_C = −55°C to +125°C, V_CC = 4.5 V  - - -    60 ns

       Minimum hold time, Pn to CP (t_h1):          T_C = +25°C, V_CC = 4.5 V  - - - - - - - -     5 ns          T_C = −55°C to +125°C, V_CC = 4.5 V  - - -     5 ns         Minimum hold time, [T bar][E bar] to CP (t_h2):          T_C = +25°C, V_CC = 4.5 V  - - - - - - - -     0 ns          T_C = −55°C to +125°C, V_CC = 4.5 V  - - -     0 ns         Minimum hold time, [P bar][E bar] to CP (t_h3):          T_C = +25°C, V_CC = 4.5 V  - - - - - - - -     2 ns          T_C = −55°C to +125°C, V_CC = 4.5 V  - - -     2 ns

Intended Use: Microcircuits conforming to this drawing are intended for use when military specifications do not exist and qualified military devices that will perform the required function are not available for OEM application. When a military specification exists and the product covered by this drawing has been qualified for listing on QPL-38510, the device specified herein will be inactivated and will not be used for new design. The QPL-38510 product shall be the preferred item for all applications.

URI: http://yse.yabesh.ir/std;quein=a/handle/yse/224290

Collections :

DLA - CC - DLA Land and Maritime

Show full item record

contributor author	DLA - CC - DLA Land and Maritime
date accessioned	2017-09-04T18:42:52Z
date available	2017-09-04T18:42:52Z
date copyright	09/20/1990
date issued	1990
identifier other	KAKVDAAAAAAAAAAA.pdf
identifier uri	http://yse.yabesh.ir/std;quein=a/handle/yse/224290
description abstract	This drawing describes device requirements for class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". The complete part number shall be as shown in the following example: The device type shall identify the circuit function as follows: Device type Generic number Circuit function 01 54HCT40102 8-bit synchronous BCD down counter, TTL compatible inputs The case outline shall be as designated in appendix C of MIL-M-38510, and as follows: Outline letter Case outline E D-2 (16-lead, .840" × .310" × .200"), dual-in-line package Supply voltage range. (V_CC) - - - - - - - - - −0.5 V dc to +7.0 V dc DC input voltage range - - - - - - - - - - - - −0.5 V dc to V_CC + 0.5 V dc DC output voltage range- - - - - - - - - - - - −0.5 V dc to V_CC + 0.5 V dc DC input diode current - - - - - - - - - - - - ±20 mA DC output diode current (per pin) - - - - - - ±20 mA DC drain current (per pin) - - - - - - - - - ±25 mA DC V_CC or GND current - - - - - - - - - - - - ±50 mA Storage temperature range - - - - - - - - - - −65°C to +150°C Maximum power dissipation (P_D) - - - - - - - - 500 mW 2/ Lead temperature (soldering, 10 seconds) - - - +300°C Thermal resistance, junction-to-case (θ_JC) - - See MIL-M-38510, appendix C Junction temperature (T_J) - - - - - - - - - - +175°C Supply voltage range (V_CC) - - - - - - - - +4.5 V dc to +5.5 V dc Input voltage range (V_IN) - - - - - - - - 0.0 V dc to V_CC Output voltage range (V_OUT) - - - - - - - 0.0 V dc to V_CC Case operating temperature range (T_C)- - - −55°C to +125°C Input rise or fall time (t_r, t_f): V_CC = 4.5 V - - - - - - - - - - - - - - 0 to 500 ns Maximum CP frequency (f_MAX): T_C = +25°C, V_CC = 4.5 V - - - - - - - - 14 MHz T_C = −55°C to +125°C, V_CC = 4.5 V - - - 9 MHz Minimum pulse width, [M bar][R bar], CP (t_w1): T_C = +25°C, V_CC = 4.5 V - - - - - - - - 35 ns T_C = −55°C to +125°C, V_CC = 4.5 V - - - 53 ns Minimum pulse width, [P bar][L bar] (t_w2): T_C = +25°C, V_CC = 4.5 V - - - - - - - - 38 ns T_C = −55°C to +125°C, V_CC = 4.5 V - - - 57 ns Minimum removal time, [M bar][R bar] to CP (t_rem): T_C = +25°C, V_CC = 4.5 V - - - - - - - - 10 ns T_C = −55°C to +125°C, V_CC = 4.5 V - - - 15 ns Minimum setup time, Pn to CP (t_s1): T_C = +25°C, V_CC = 4.5 V - - - - - - - - 24 ns T_C = −55°C to +125°C, V_CC = 4.5 V - - - 36 ns Minimum setup time, [P bar][E bar] to CP (t_s2): T_C = +25°C, V_CC = 4.5 V - - - - - - - - 20 ns T_C = −55°C to +125°C, V_CC = 4.5 V - - - 30 ns Minimum setup time, [T bar][E bar] to CP (t_s3): T_C = +25°C, V_CC = 4.5 V - - - - - - - - 40 ns T_C = −55°C to +125°C, V_CC = 4.5 V - - - 60 ns Minimum hold time, Pn to CP (t_h1): T_C = +25°C, V_CC = 4.5 V - - - - - - - - 5 ns T_C = −55°C to +125°C, V_CC = 4.5 V - - - 5 ns Minimum hold time, [T bar][E bar] to CP (t_h2): T_C = +25°C, V_CC = 4.5 V - - - - - - - - 0 ns T_C = −55°C to +125°C, V_CC = 4.5 V - - - 0 ns Minimum hold time, [P bar][E bar] to CP (t_h3): T_C = +25°C, V_CC = 4.5 V - - - - - - - - 2 ns T_C = −55°C to +125°C, V_CC = 4.5 V - - - 2 ns Intended Use: Microcircuits conforming to this drawing are intended for use when military specifications do not exist and qualified military devices that will perform the required function are not available for OEM application. When a military specification exists and the product covered by this drawing has been qualified for listing on QPL-38510, the device specified herein will be inactivated and will not be used for new design. The QPL-38510 product shall be the preferred item for all applications.
language	English
title	SMD-5962-90574	num
title	MICROCIRCUITS, DIGITAL, HIGH SPEED CMOS, 8-BIT SYNCHRONOUS BCD DOWN COUNTER, TTL, COMPATIBLE, MONOLITHIC SILICON	en
type	standard
page	14
status	Active
tree	DLA - CC - DLA Land and Maritime:;1990
contenttype	fulltext