SMD-5962-96747

DLA - CC - DLA Land and Maritime

MICROCIRCUIT, DIGITAL, ADVANCED CMOS, SCAN PATH SELECTOR WITH 8-BIT BIDIRECTIONAL DATA BUS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON

Organization:

DLA - CC - DLA Land and Maritime

Year: 1997

Abstract: This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN.
The PIN is as shown in the following example:

Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type identifies the circuit function as follows:

     Device type          Generic number                    Circuit function          01                 54ACT8999           Scan path selector with 8-bit bidirectional data                                                bus, TTL compatible inputs

The device class designator is a single letter identifying the product assurance level as follows:

     Device class                           Device requirements documentation           M                   Vendor self-certification to the requirements for MIL-STD-883 compliant,                              non-JAN class level B microcircuits in accordance with MIL-PRF-38535,                              appendix A         Q or V                Certification and qualification to MIL-PRF-38535

The cases outline are as designated in MIL-STD-1835 and as follows:

     Outline letter      Descriptive designator      Terminals           Package style            X                  GDIP4-T28                  28             Dual-line package           3                  CQCC1-N28                  28             Square chip carrier

The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M.

     Supply voltage range (V_CC) ........................................... −0.5 V dc to +7.0 V dc      DC input voltage range (V_IN) ......................................... −0.5 V dc to V_CC +0.5 V dc 4/      DC output voltage range (V_OUT) ....................................... −0.5 V dc to V_CC +0.5 V dc 4/      DC input clamp current (I_IK) (V_IN < 0.0 V or V_I > V_CC) ............... ±20 mA      DC output clamp current (I_OK) (V_IN < 0.0 V or V_I > V_CC) .............. ±20 mA      Continuous output current, I_O (V_O = 0 to V_CC) ........................ ±25 mA      Storage temperature range (T_STG) ..................................... −65°C to +150°C      Lead temperature (soldering, 10 seconds) ............................. +300°C      Thermal resistance, junction-to-case (Θ_JC) ........................... See MIL-STD-1835      Junction temperature (T_J) ............................................ +175°C      Maximum power dissipation (P_D) ....................................... 85 mW 5/

     Supply voltage range (V_CC) ........................................... +4.5 V dc to +5.5 V dc      Minimum high level input voltage (V_IH) ............................... +2.0 V      Maximum low level input voltage (V_IL) ................................ +0.8 V      Input voltage range (V_IN) ............................................ +0.0 V dc to V_CC      Output voltage range (V_OUT) .......................................... +0.0 V dc to V_CC      Maximum high level output current (I_OH):        ID (1-8) ........................................................... −1.6 mA        TDO, DTDO, MCO ..................................................... −8.5 mA        DTMS (1-4), DCO (three-state), [D bar][T bar][R bar][S bar][T bar], DTCK ......................... −13.6 mA      Maximum low level output current (I_OL):        ID (1-8) ........................................................... +1.6 mA        TDO, DTDO, MCO ..................................................... +8.5 mA        DTMS (1-4), DCO (three-state or open drain) ........................ +13.6 mA        [D bar][T bar][R bar][S bar][T bar] .............................................................. +20.4 mA        DTCK ............................................................... +40.8 mA      Case operating temperature range (T_C) ................................ −55°C to +125°C

     Fault coverage measurement of manufacturing         logic tests (MIL-STD-883, test method 5012) ....................... XX percent 6/

Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device class Q devices will replace device class M devices.

URI: http://yse.yabesh.ir/std;quein=a/handle/yse/224699

Collections :

DLA - CC - DLA Land and Maritime

Show full item record

contributor author	DLA - CC - DLA Land and Maritime
date accessioned	2017-09-04T18:43:16Z
date available	2017-09-04T18:43:16Z
date copyright	03/18/1997
date issued	1997
identifier other	KBOAEAAAAAAAAAAA.pdf
identifier uri	http://yse.yabesh.ir/std;quein=a/handle/yse/224699
description abstract	This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN. The PIN is as shown in the following example: Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. The device type identifies the circuit function as follows: Device type Generic number Circuit function 01 54ACT8999 Scan path selector with 8-bit bidirectional data bus, TTL compatible inputs The device class designator is a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 The cases outline are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style X GDIP4-T28 28 Dual-line package 3 CQCC1-N28 28 Square chip carrier The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M. Supply voltage range (V_CC) ........................................... −0.5 V dc to +7.0 V dc DC input voltage range (V_IN) ......................................... −0.5 V dc to V_CC +0.5 V dc 4/ DC output voltage range (V_OUT) ....................................... −0.5 V dc to V_CC +0.5 V dc 4/ DC input clamp current (I_IK) (V_IN < 0.0 V or V_I > V_CC) ............... ±20 mA DC output clamp current (I_OK) (V_IN < 0.0 V or V_I > V_CC) .............. ±20 mA Continuous output current, I_O (V_O = 0 to V_CC) ........................ ±25 mA Storage temperature range (T_STG) ..................................... −65°C to +150°C Lead temperature (soldering, 10 seconds) ............................. +300°C Thermal resistance, junction-to-case (Θ_JC) ........................... See MIL-STD-1835 Junction temperature (T_J) ............................................ +175°C Maximum power dissipation (P_D) ....................................... 85 mW 5/ Supply voltage range (V_CC) ........................................... +4.5 V dc to +5.5 V dc Minimum high level input voltage (V_IH) ............................... +2.0 V Maximum low level input voltage (V_IL) ................................ +0.8 V Input voltage range (V_IN) ............................................ +0.0 V dc to V_CC Output voltage range (V_OUT) .......................................... +0.0 V dc to V_CC Maximum high level output current (I_OH): ID (1-8) ........................................................... −1.6 mA TDO, DTDO, MCO ..................................................... −8.5 mA DTMS (1-4), DCO (three-state), [D bar][T bar][R bar][S bar][T bar], DTCK ......................... −13.6 mA Maximum low level output current (I_OL): ID (1-8) ........................................................... +1.6 mA TDO, DTDO, MCO ..................................................... +8.5 mA DTMS (1-4), DCO (three-state or open drain) ........................ +13.6 mA [D bar][T bar][R bar][S bar][T bar] .............................................................. +20.4 mA DTCK ............................................................... +40.8 mA Case operating temperature range (T_C) ................................ −55°C to +125°C Fault coverage measurement of manufacturing logic tests (MIL-STD-883, test method 5012) ....................... XX percent 6/ Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device class Q devices will replace device class M devices.
language	English
title	SMD-5962-96747	num
title	MICROCIRCUIT, DIGITAL, ADVANCED CMOS, SCAN PATH SELECTOR WITH 8-BIT BIDIRECTIONAL DATA BUS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON	en
type	standard
page	32
status	Active
tree	DLA - CC - DLA Land and Maritime:;1997
contenttype	fulltext