درباره ما
NAVY - SH - Naval Sea Systems Command (Ship Systems): Recent submissions
Now showing items 381-400 of 2792
-
MIL-PRF-32407
Abstract: This specification covers resilient mounts (see 6.4.8) used to support mechanical or electrical equipment for use in surface ship applications internal to the hull. Mounts in accordance with this specification are considered ...Subject(s) : Isolator , Shock , Vibration , -
MIL-E-24142/8C
Abstract: This specification sheet is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The complete requirements. ... -
HH-P-31F
Abstract: This specification covers fibrous glass metallic cloth and tape packing for boiler casing access openings or insulation lagging pads and heavy-weight, rubber treated fibrous glass cloth and tape for pipe flange joint ...Subject(s) : Fibrous glass , rubber-treated , Fibrous glass , wire-reinforced plain , -
MIL-C-15306G
Abstract: This specification covers call signal stations for use with sound powered systems on Naval ships. Intended Use: The call signal stations covered by this specification is intended for use as a shipboard ...Subject(s) : Audio transducer , Terminal , Wire dressing , -
MIL-A-18001K INT AMD 3 NOTICE 1
Abstract: This amendment forms a part of MIL-A-18001X, dated 16 December 1991, and is approved for use within the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the ... -
FED-STD-162A CHG NOTICE 1
Abstract: This standard covers visible defects in natural or synthetic rubber hose. -
MIL-V-3155C (1)
Abstract: This specification covers thermostatic-controlled steam valves for temperature regulation of shipboard ventilation heaters. These valves are of the self-operated type, requiring no separate power source such as electricity ... -
A-A-59006
Abstract: This commercial item description covers sight flow pipeline indicators intended for installation in drain lines of strainer, where flow indication is necessary for backflush and draining operations. -
MIL-R-24337A
Abstract: This specification covers the requirements of 8 strand plaited nylon rope. Intended Use: The rope covered by this specification is intended for use where relative freedom from torque deformation is ...Subject(s) : Splices , Strands , rope , Yarns , -
A-A-59003
Abstract: This Commercial Item Description covers audio frequency amplifiers and controls, shipboard announcing type, for use aboard Naval ships. The above amplifiers are to be employed as units in shipboard announcing systems which ... -
MIL-T-594B
Abstract: This specification covers the Test Sets (growlers) for locating defective circuits in armatures or stators in rotating electrical machines.
Test Sets shall be of the following types, as specified (see 6.1 and ... -
MIL-STD-167-1A
Abstract: This standard specifies procedures and establishes requirements for environmental and internally excited vibration testing of Naval shipboard equipment installed on ships with conventionally shafted propulsion (see 6.1.e ...Subject(s) : Balance quality grade , Balancing , Flexible rotor , Response prominence , Rigid rotor , -
MIL-HDBK-803
Abstract: This handbook provides guidance for preventive maintenance of glass reinforced plastic (GRP) items, as well as instructions and illustrations on proper repair techniques for minor damage to reinforced plastic structures. ...Subject(s) : Accelerator , Adhesion , Alligatoring , Chine , Crazing , Cross-linking , Cure time , Delamination , -
MIL-W-18445D
Abstract: This specification covers non-icing, flat laminated, electrically heated glass windows contained in metal frames, with temperature controls necessary for operation. The windows are to provide clear vision aboard ships ... -
MIL-F-24704/4A
Abstract: This specification sheet covers the requirements for four bolt square blind flanges for use in 3000 pounds per square inch (lb/in2) hydraulic systems. -
MIL-C-28754/52A
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The complete requirements for acquiring the housing described herein shall consist of this specification and the ... -
MIL-C-16385E
Abstract: This specification covers carbon dioxide cartridges for use with Underwater Demolition Team and Yoke Type SCUBA CO2 Inflatable Life Preservers (see 6.1).
The cartridges furnished under this specification ...