درباره ما
NAVY - SH - Naval Sea Systems Command (Ship Systems): Recent submissions
Now showing items 401-420 of 2792
-
MIL-PRF-907F
Abstract: This specification covers antiseize compound for use on threads of steel nuts, studs, bolts and other mating surfaces, including those of superheated steam installations, at temperatures up to 1050 degrees Fahrenheit ...Subject(s) : Thread lubricant , -
MIL-H-21367/21
Abstract: This specification is approved for use within the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
MS18297 VALID NOTICE 1
Abstract:NOTICE OF VALIDATION
MS18297, dated 7 April 1972, has been reviewed and determined to be valid for use in acquisition. -
MIL-DTL-24560A
Abstract: This specification covers light assemblies and associated glassware used for navigation, signal, and warning purposes on Naval ships. Intended Use: Navigation lights covered by this specification are intended ...Subject(s) : Fresnel globe , Fresnel lens , Globe , Lens , Roundel , -
MIL-DTL-22200/1H INT AMD 1
Abstract: This specification covers iron-powder, low-hydrogen types of mineral covered electrodes, for the fabrication and repair welding of low and medium carbon and high tensile steels for as-welded and stress-relieved ...Subject(s) : Wire,core , -
MIL-C-24757
Abstract: This specification covers one type of inherently fire-safe, shrink-safe, woven cloths.
Cloth covered by this specification shall be as specified (see 6.2):
100 percent fiberglass base material that is ...Subject(s) : Smoke barriers , Smoke containment , -
MIL-C-28754/92
Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
MIL-STD-2003A
Abstract: This standard covers shipboard installation requirements for electrical cable, equipment, penetrations, cableways, and connectors. This standard consists of this general standard and five parts as follows:
Part 1 (Cable) ...Subject(s) : Battery equipment , Cable lead preparation , Casualty power , Connection preparation , Connectors , Double banking , End-sealing , Equipment entry , Hangers , Kickpipes , Multi-cable transits , Shore power , Splicing , Stuffing tubes , Switchboard mounting , Tier , Water blocked , -
MIL-F-16377/25A
Abstract: This specification sheet is approved for use by the Naval Sea Systems Command and is available for use by all Departments and Agencies of the Department of Defense.
The complete requirements for acquiring the fixtures ...