درباره ما
ISO DIS 17484-1.2
Plastics piping systems - Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Part 1: Specifications for systems
Organization:
ISO - International Organization for Standardization
Year: 2013
Abstract: This part of ISO 17484 applies to systems that operate at temperatures of - 20 °C up to 60 °C.
For the purpose of this part of ISO 17484, crosslinked polyethylene (PE-X) and adhesive layers are considered as thermoplastic materials.
PE-X and PE pipes composed of one stress-designed layer, adhesive and a barrier layer are also covered by this part of ISO 17484.
For sizes greater than 63 mm the requirements of ISO 18225 have to be fulfilled in addition.
This part of ISO 17484 is applicable for piping systems used in buildings to supply gas with a maximum operating pressure up to and including 500 kPa (5 bar)1).
This standard applies to the following fuels:
- Category D gaseous fuel: natural gas; see ISO 13623;
- Category E gaseous fuel: LPG vapour, and natural gas or LPG vapour; see ISO 13623.
1) 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2
For the purpose of this part of ISO 17484, crosslinked polyethylene (PE-X) and adhesive layers are considered as thermoplastic materials.
PE-X and PE pipes composed of one stress-designed layer, adhesive and a barrier layer are also covered by this part of ISO 17484.
For sizes greater than 63 mm the requirements of ISO 18225 have to be fulfilled in addition.
This part of ISO 17484 is applicable for piping systems used in buildings to supply gas with a maximum operating pressure up to and including 500 kPa (5 bar)1).
This standard applies to the following fuels:
- Category D gaseous fuel: natural gas; see ISO 13623;
- Category E gaseous fuel: LPG vapour, and natural gas or LPG vapour; see ISO 13623.
1) 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2
Collections
:
-
Statistics
ISO DIS 17484-1.2
Show full item record
| contributor author | ISO - International Organization for Standardization | |
| date accessioned | 2017-09-04T18:46:08Z | |
| date available | 2017-09-04T18:46:08Z | |
| date copyright | 2013.06.14 | |
| date issued | 2013 | |
| identifier other | KIRTDFAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;quein=autho162sAF6D081DAC4/handle/yse/227398 | |
| description abstract | This part of ISO 17484 applies to systems that operate at temperatures of - 20 °C up to 60 °C. For the purpose of this part of ISO 17484, crosslinked polyethylene (PE-X) and adhesive layers are considered as thermoplastic materials. PE-X and PE pipes composed of one stress-designed layer, adhesive and a barrier layer are also covered by this part of ISO 17484. For sizes greater than 63 mm the requirements of ISO 18225 have to be fulfilled in addition. This part of ISO 17484 is applicable for piping systems used in buildings to supply gas with a maximum operating pressure up to and including 500 kPa (5 bar)1). This standard applies to the following fuels: - Category D gaseous fuel: natural gas; see ISO 13623; - Category E gaseous fuel: LPG vapour, and natural gas or LPG vapour; see ISO 13623. 1) 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2 | |
| language | English | |
| title | ISO DIS 17484-1.2 | num |
| title | Plastics piping systems - Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Part 1: Specifications for systems | en |
| type | standard | |
| page | 44 | |
| status | Draft | |
| tree | ISO - International Organization for Standardization:;2013 | |
| contenttype | fulltext |