درباره ما
ECIA - Electronic Components Industry Association: Recent submissions
Now showing items 201-220 of 507
-
ECA EIA-364-41E
Abstract: This standard establishes a method to determine the effectiveness of round jacketed cable to connector strain relief seal, or flat cable to connector strain relief seal or interface to withstand strain under repeated ... -
ECA EIA-364-114
Abstract: This test procedure establishes a test method to determine the coupling/uncoupling forces required to couple and uncouple circular electrical connectors, sockets and applicable accessories. -
ECA IS-43AD
Abstract: This Detail Specification defines Type 1 Plenum cable used with the Token Ring LAN Cabling System. Type 1 P consists of 2 twisted pairs of Data Grade Media (DGM) shielded with aluminum tape and braided shields, all cabled ... -
ECA EIA-364-111
Abstract: This standard establishes 2 methods for determining the total amount of extractable ionic contamination on the surface of an electrical connector or socket assembly or component.
Method A, Ionography ... -
ECA EIA-364-51A
Abstract: This standard establishes test methods to determine the ability of mated electrical connectors to resist the effects of ice build-up due to water splashing or brief immersion in water, where water is free to drain off of ... -
ECA EIA-520DAAB
Abstract: The standard size, two pole watertight toggle switches of certified quality covered by this detail specification
a) mount in a 12.4 mm (.4 9 inch) diameter mounting hole.
b) have a maximum rated voltage of 2'74 ... -
ECA 172-B
Abstract: This standard covers insulated, fixed resistors having a composition resistance element and capable of full load operation at an ambient temperature of 70°C. This standard describes minimum *limits of performance ... -
ECA RS-162
Abstract: This standard describes the standard test procedures to be used for ceramic based printed circuits. It specifically covers the type A unit, but may be used as far as applicable for type B units, as defined below. Unit ... -
ECA TEP105-17
Abstract: MTFs FOR MONOCHROME CRTs
Background
In most cases, the interface between humans and machines is a visual display.
The sharpness and readability of raster-scanned Cathode-Ray Tube (CRT) ... -
ECA 446-A
Abstract: This Standard relates to non-sensitive pushhutton switches for use in electrical and electronic equipment, and having a maximum voltage rating of 500 Vac or Vdc or a current rating not exceeding 25 amperes. -
ECA 202-A
Abstract: PURPOSE
The purpose of this recommended practice is to supply the essential information required for the preparation of satisfactory tube and base outline drawings (hereinafter referred to as "outlines") ... -
ECA 186-2E
Abstract: PURPOSE
This test is intended to evaluate in an accelerated manner, the resistance of component parts to deterioration resulting from high humidity and heat conditions typical of tropical environments. ... -
ECA RS-429
Abstract: This standard defines the requirements for multi-contact, electrical connectors for use with flexible flat cable, conventional round wire, and printed wiring for commercial applications.
Classifications: Electrical ... -
ECA EIA/ECA-364-53B
Abstract: This standard establishes test methods to determine the magnitude of porosity as well as other surface defects inherent in application of gold contact finishes.
Object
It is the intent that the defined method be ... -
ECA 567-A
Abstract: This standard defines concepts, terminology, and information required for constructing a VHDL component model to be used in a hierarchical design and simulated interoperably with other models conforming to this standard. ... -
ECA RS-175
Abstract: This standard covers iron core inductors for use in electronic equipment in which long life, reliability, and continuity of operation are essential and which are employed for frequency discrimination elements or for filters ...