درباره ما
ECIA - Electronic Components Industry Association: Recent submissions
Now showing items 321-340 of 507
-
ECA EIA-403-A
Abstract: FOREWORD
Members of the P-5.3.1 Working Group have long known the need for the provision of accurate impedance standards in 75-ohm coaxial measurements. These standards will be necessary for the qualification of the ... -
ECA EIA-448-23
Abstract: Switches to be tested shall have passed all Incoming Inspection requirements. Contact resistance shall be less than 50 milliohms. Continuity/ circuit configurations shall be as specified. Switches should be sealed sufficiently ... -
ECA 268
Abstract: PURPOSE
The purpose of this standard is to establish the transmission of an infrared filter for use in making certain measurements on electron tubes.
It is entirely feasible that additional ... -
ECA 520EAAD
Abstract: The Dual In-line Machine Insertable Switches of certified quality covered by this Detail Specification:
Have maximum enclosure dimensions of 33.02 mm (1.300 inch) long, 10.16 (0.400) wide and 14.06 (0.554) high.
Have ... -
ECA 699
Abstract: This document provides nomenclature, methods, and criteria for characterizing acceptable quartz resonator blanks. Its major objective is to aid in the evaluation of the crystal blank through visual inspection of quartz ... -
ECA 520D000
Abstract: This Sectional Specification relates to the toggle, paddle and rocker operated family of special-use electro-mechanical switches of certified quality. These families of switches are for use in electrical or electronic ... -
ECA 540BA00
Abstract: The Pin Grid Array Sockets of assessed quality covered by this detail specification have:
1. Maximum enclosure of (maximum length, width, and height dimensions).
2. A working voltage of (highest working voltage). ... -
ECA EIA-364-34
Abstract: This standard establishes test methods for the evaluation of connectors and sockets as they are influenced by the effects of high condensing humidity and heat.
Object
This is an accelerated environmental test, ... -
ECA EIA/ECA-364-10E
Abstract: This standard establishes test methods to determine the ability of an electrical connector or connector assembly to resist degradation due to exposure to specific fluids with which the connector assembly may come into ... -
ECA EIA-364-23C
Abstract: This test procedure may apply to any type or combination of current carrying members such as pin and socket contacts, relay contacts, wire and crimp connectors, or printed circuit board and contact. -
ECA 4980000-A
Abstract: This Generic Specification relates to keyswitches, keypads, and keyboard switches of certified quality. Switches covered by this Specification provide manual interface with electronic logic circuits in commercial, industrial, ... -
ECA EIA/ECA-364-21D
Abstract: This standard applies to electrical connectors, sockets and coaxial contacts.
Object
The object of this test procedure is to detail a standard method to assess insulation resistance. -
ECA RS-399-A
Abstract: This standard covers the dimensional specifications considered essential for the successful interchange of cartridge called EIA Type CP-II (Compact Cassette) between equipment designed for audio recording and reproducing ...