درباره ما
MIL-S-82359
SWITCH, ROTARY, VARIABLE RESISTOR ASSEMBLY TYPE
Year: 1969
Abstract: This specification covers rotating, commutator type, switches constructed in potentiometer housings. They may be used with or without potentiometers. The switches are for use in training equipment only.
- Switch type designations shall be in the following form as specified (see 6.2):
The style is identified by the letter "S" followed by a two-digit number; the letter identifies switch, rotary, variable resistor assembly type, and the number identifies the diameter in ⅛-inch increments.
Terminal boards shall be of two types, the letter "A" designating a 110-degree arc terminal board, and the letter "B" designating 180-degree arc terminal board (see 3.3.5).
Intended Use: The switch is used in simulator computational systems. The capability of angular placement of bus bars having various angular lengths provides for selection of switch ON/OFF positions as the operating shaft is rotated.
- Switch type designations shall be in the following form as specified (see 6.2):
Type designation form - single-section switches Style Terminal Board S16 A S16 B
The style is identified by the letter "S" followed by a two-digit number; the letter identifies switch, rotary, variable resistor assembly type, and the number identifies the diameter in ⅛-inch increments.
Terminal boards shall be of two types, the letter "A" designating a 110-degree arc terminal board, and the letter "B" designating 180-degree arc terminal board (see 3.3.5).
Intended Use: The switch is used in simulator computational systems. The capability of angular placement of bus bars having various angular lengths provides for selection of switch ON/OFF positions as the operating shaft is rotated.
Show full item record
| contributor author | NAVY - TD - Naval Air Warfare Center, Training Systems Division | |
| date accessioned | 2017-09-04T16:34:10Z | |
| date available | 2017-09-04T16:34:10Z | |
| date copyright | 07/14/1969 | |
| date issued | 1969 | |
| identifier other | UWIPDAAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;query=autho1216AF6769B7526/handle/yse/97569 | |
| description abstract | This specification covers rotating, commutator type, switches constructed in potentiometer housings. They may be used with or without potentiometers. The switches are for use in training equipment only. - Switch type designations shall be in the following form as specified (see 6.2): Type designation form - single-section switches Style Terminal Board S16 A S16 B The style is identified by the letter "S" followed by a two-digit number; the letter identifies switch, rotary, variable resistor assembly type, and the number identifies the diameter in ⅛-inch increments. Terminal boards shall be of two types, the letter "A" designating a 110-degree arc terminal board, and the letter "B" designating 180-degree arc terminal board (see 3.3.5). Intended Use: The switch is used in simulator computational systems. The capability of angular placement of bus bars having various angular lengths provides for selection of switch ON/OFF positions as the operating shaft is rotated. | |
| language | English | |
| title | MIL-S-82359 | num |
| title | SWITCH, ROTARY, VARIABLE RESISTOR ASSEMBLY TYPE | en |
| type | standard | |
| page | 23 | |
| status | Active | |
| tree | NAVY - TD - Naval Air Warfare Center, Training Systems Division:;1969 | |
| contenttype | fulltext |