Browsing ARMY - GL2 - U.S. Army Soldier Systems Center by Issue Date
Now showing items 1-20 of 30
-
MIL-DTL-44033B
Abstract: This specification covers one type of concentric multi-loop lines fabricated of webbing and intended for use in airdrop operations. Intended Use: The items are intended for use in the rigging, extraction and ...Subject(s) : Air delivery , Extraction , Parachute , Rigging , -
A-A-52197
Abstract: This commercial item description describes two types of parachute packing weights for use as packing aids.
The packing weights are intended for use by parachute riggers for holding canopy gores in position during the ... -
MIL-DTL-44484
Abstract: This specification covers 1 type of Truss Assembly used with the Type V Airdrop Platform.
The Trusses will be of the following sizes, and as specified (see 6.2).Type I - 12 Foot ...
Subject(s) : Airdrop System , Cargo loads , Modular assemblies , Parachute , Platform , Resupply , -
MIL-DTL-44476A
Abstract: This document covers one type and size of a parachutist's reinforced jump container. The container is fabricated from nylon duck cloth and nylon webbing. Intended Use: The container assembly is used by ...Subject(s) : Air delivery , Carrier , Weapons case , -
MIL-DTL-44477A
Abstract: This document covers one type and size of a parachutist's individual equipment container. Intended Use: The container assembly is used by airborne personnel during parachute operations.Subject(s) : Air delivery , Carrier , -
MIL-DTL-44475A
Abstract: This specification covers one type of a fabric release assembly. Intended Use: The fabric release assembly is used by airborne personnel to release a container assembly during a parachute descent.Subject(s) : Airborne jump operations , -
A-A-59143
Abstract: This commercial item description covers a table for inspection of parachute canopies. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this ... -
MIL-PRF-9884F
Abstract: This specification covers the performance and acceptance requirements for a pad which dissipates the energy at impact of items that are airdropped. Intended Use: The energy dissipator pad is cut into sections ...Subject(s) : Absorber,shock , Cushion , -
MIL-STD-814D
Abstract: This standard establishes the design, number, and location requirements of airdrop tiedown, suspension, and extraction provisions on airdrop items delivered by LVAD.
These requirements are applicable to provisions ...Subject(s) : LVAD , Parachute , Platform , Rigging , -
MIL-STD-913A
Abstract: This standard covers design testing and performance requirements of military equipment for Helicopter Sling Loading (HSL) by Army, Navy, Marine Corps, and Coast Guard rotary wing aircraft. The complete air transportability ...Subject(s) : External air transport , Helicopter , Sling loading , -
MIL-HDBK-669
Abstract: This handbook defines the loading environments for which items of military materiel experience when airdropped as platform loads, specifies essential design considerations, and establishes a method to obtain a preliminary ...Subject(s) : Energy dissipater , Extraction , Restraint , Suspension , Tiedown ,