درباره ما
ACI - American Concrete Institute: Recent submissions
Now showing items 481-500 of 636
-
ACI 213R
Abstract: The objectives of this guide are to provide information and guidelines for designing and using lightweight concrete. By using such guidelines and construction practices, the structures can be designed and performance ...Subject(s) : abrasion resistance , aggregate , bond , contact zone , durability , -
ACI 336.2R
Abstract: This report addresses the design of shallow foundations carrying more than a single column or wall load. Although the report focuses on the structural aspects of the design, soil mechanics considerations are vital and the ...Subject(s) : concretes , earth pressure , footings , foundations , loads (forces) , mat foundations , reinforced concrete , soil mechanics , stresses , structural analysis , structural design , -
ACI 435.8R
Abstract: Synopsis: This report is in two distinct parts
Part I is a summary of published studies on slab deflections (3 from Australia, 1 from Scotland, 1 from Sweden, 2 from U.S.). The ... -
ACI 548.14M
Abstract: This specification covers the repairing of defects in hardened concrete with an epoxy mortar as specified in Contract Documents.
This specification governs for construction within its scope, except the Contract ... -
ACI 306.1
Abstract: This Standard Specification covers requirements for cold weather concreting and protection of concrete from freezing during the specified protection period.
The provision of this Standard Specification shall govern ...Subject(s) : accelerating admixtures , cold weather , compressive strength , construction , curing , formwork , freezing , heating , insulation , maturity , protection , temperature , -
ACI 303.1
Abstract: This Standard Specification covers requirements for the materials and production of cast-in-place architectural concrete having as cast or treated surfaces which are listed in the specifications and located on the plans.
The ...Subject(s) : abrasive blasting , architectural concrete , as-cast finish , bushhammering , cements , colored concrete , colors (materials) , concrete construction , concrete finishes , consolidation , curing , exposed aggregate , placing , repairs , rustications , sealants , sealers , specifications , surface retarders , texture , -
ACI 548.8
Abstract: This Specification covers materials and procedures for constructing a polymer overlay for new construction and for repair and rehabilitation of bridge and parking garage decks. Type EM polymer overlay incorporates a low ... -
ACI 301
Abstract: Work specified—This Specification governs the construction of cast-in-place and precast structural concrete and industrial floor slabs cast on ground.
Provisions of this Specification shall govern except ...Subject(s) : architectural , cold weather , compressive strength , concrete slab , consolidation , curing , durability , finish , formwork , grouting , hot weather , industrial floors , inspection , joints , lightweight concrete , mass concrete , mixture proportions , placing , post-tensioned , precast , prestressing steel , repair , reshoring , shoring , shrinkage-compensating , slabs-on-ground , steel reinforcement , testing , tilt-up , tolerance , welded wire , -
ACI ITG-8R
Abstract: Objective and scope
The objectives of this report are to:
• Provide an introduction to performance specification and how it compares with prescriptive specification;
• Discuss the ...Subject(s) : acceptance criteria , bonus-penalty provisions , building code , durability , in-place tests , performance specification , prescriptive specification , quality assurance (QA) , responsibility , sampling , sustainability , test methods , -
ACI 423.4R
Abstract: This report includes a review of the following:
• Codes and code changes affecting unbonded post-tensioning tendons;
• Past and present corrosion protection systems and how those ... -
ACI C-26
Abstract: Preface
ACI Compilations combine material previously published in Institute periodicals to provide compact and ready reference on specific topics. The Material in a compilation does not necessarily ...Subject(s) : abrasive blasting , architectural concrete , bags , concrete construction , cracking (fracturing) , fabric , form removal , forming techniques , formwork (construction) , locks (waterways) , oils , parting agents , piles: revetments , precast concrete , renovating , repairs , structural design , walls , waxes , -
ACI 311.4R
Abstract: This document is primarily intended for guidance in the development of inspection and testing plans that are part of the overall system designed to ensure quality in the finished concrete product. ACI Committee 311 recommends ...Subject(s) : concrete , construction , inspection , quality assurance , quality control , testing. , -
ACI C-23
Abstract: Preface
AC1 Compilations combine material previously published in Institute periodicals to provide compact and ready reference on specific topics. The Material in a compilation does not necessarily ... -
ACI 336.1
Abstract: This Reference Specification covers requirements for drilled pier construction and applies to drilled piers of 30 in. (750 mm) diameter and larger. The Contractor shall submit proposed installation methods to the Owner's ...Subject(s) : bored pile , caisson , concrete , drilled pier , foundation , placing , reinforced concrete , reinforcement , slurry , soil , specification , test , tolerance. , -
ACI 304.3R
Abstract: Presents recommended methods and procedures for measuring, mixing, transporting, and placing heavyweight concretes that are used principally for radiation shielding in nuclear construction. Also covered are recommendations ... -
ACI 350.5M
Abstract: Work specified—This specification covers cast-inplace environmental concrete and shotcrete. Provisions of this specification shall govern except where other provisions are specified in Contract Documents. ... -
ACI 548.5R
Abstract: This guide is intended to aid in the proper selection and use of PC overlays for structures in the transportation industry, focusing primarily on bridge and parking garage decks. Materials discussed are epoxies, polyesters, ...