Now showing items 661-680 of 2832

    • IEEE Recommended Practice for Electronic Power Subsystems: Parameters, Interfaces, Elements, and Performance 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: A technical basis for implementation of electronic power subsystems is provided in this recommended practice. It is intended for electronic systems engineers and integrators, electronic power subsystem designers and ...
      Subject(s) : electronic power subsystems , power electronics , IEEE 1573 ,
    • IEEE Standard for Requirements for Power Line Carrier Transmitter/ Receiver Equipment used to Transfer Discrete Teleprotection Signals 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Requirements for power line carrier (PLC) transmitter/receiver equipment used to transfer discrete teleprotection signals at power line carrier frequencies (30-500 kHz) are described in this standard. Test requirements and ...
      Subject(s) : dependability , power line carrier , FSK , teleprotection , transmitter , PLC , IEEE C93.5 , security , ON-OFF , receiver , transceiver ,
    • IEEE Standard for Autonomous Robotics (AuR) Ontology 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard extends IEEE Std 1872-2015, IEEE Standard for Ontologies for Robotics and Automation, to represent additional domain-specific concepts, definitions, and axioms commonly used in Autonomous Robotics (AuR). This ...
      Subject(s) : robotics , IEEE1872.2 , ontology , autonomous robots , automation ,
    • IEEE Standard for Helically-Applied Fiber Optic Cable Systems (WRAP) for Use on Overhead Utility Lines - Redline 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2021
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: An all-dielectric fiber optic cable (WRAP) designed to be helically wrapped around a conductor or other messenger on overhead power facilities is covered by this standard.
      Subject(s) : IEEE 1954 , all-dielectric , messenger , helical , cable , conductor , earth wire , power lines , WRAP , fiber optic , wrapped , helically , ground wire ,
    • IEEE Standard for Wireless Diabetes Device Security Assurance Evaluation: Connected Electronic Product Security Evaluation Programs 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: A framework for a connected electronic product security assurance evaluation program, with specific requirements and guidance relating to digital diabetes devices and solutions, such as insulin pumps is described in this standard.
      Subject(s) : devices , protection profile , security , diabetes , firmware , assurance , evaluator , IEEE 2621.1 , security target ,
    • IEEE Recommended Practice for Wireless Diabetes Device Security: Use of Mobile Devices in Diabetes Control Contexts 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: A framework for a connected electronic product security evaluation program, with specific requirements and guidance relating to digital diabetes devices and solutions, such as insulin pumps is defined in this standard.
      Subject(s) : devices , IEEE 2621.3 , protection profile , security , diabetes , firmware , assurance , evaluator , security target ,
    • IEEE Standard for Utility Industry End Device Communications Module 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard is an extension to IEEE Std 1703(TM). Physical hardware interfaces and signals, such as logical interface and power (digital and mains), that link metrology devices to communications modules via the USB ...
      Subject(s) : communication module , smart grid , end device , AMI , AMI retrofitting , network interface card , comm module , physical interface , advance metering infrastructure , detachable module , plug-and-play , removable module , IEEE 1377 , swappable module , IEEE 1704 , WAN , meter , AMI interoperability , multi-sourcing , IEEE 1703 ,
    • IEEE SA 3D Body Processing Industry Connections--Comparative Analysis of Anthropometric Methods: Past, Present, and Future 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The 3DBP IC’s Quality subgroup focuses on developing preliminary methods, tools, benchmarks, resources, and testing procedures to define and quantify the quality of 3D models as well as the quality of the critical metadata, ...
      Subject(s) : analysis , 3D Body Processing , data collection , body shapes , white paper , 3DBP , Industry Connections , methodology ,
    • IEC/IEEE International Standard - Assessment of power density of human exposure to radio frequency fields from wireless devices in close proximity to the head and body (frequency range of 6 GHz to 300 GHz)--Part 2: Computational procedure 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Subject(s) : IEC Standards , Radiation detection , Power system measurement , Density measurement , Human factors , IEEE Standards , Frequency measurement ,
    • IEEE Standard for Wireless Diabetes Device Security: Information Security Requirements for Connected Diabetes Solutions 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: A framework for a connected electronic product security evaluation program, with specific requirements and guidance relating to digital diabetes devices and solutions, such as insulin pumps is defined in this standard.
      Subject(s) : devices , protection profile , security , diabetes , firmware , assurance , evaluator , IEEE 2621.1 , security target ,
    • IEEE Guide for Automatic Reclosing on AC Distribution and Transmission Lines 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Accepted industry practices for application of automatic reclosing on transmission and distribution lines are documented in this guide. The guide discusses fundamentals of automatic reclosing, application considerations, ...
      Subject(s) : voltage supervision , autoreclosing , high-speed autoreclosing , automatic reclosing , reclosing , fuse blowing scheme , automatic line sectionalizer , autoreclose supervision , IEEE C37.104™ , sync check , time delayed autoreclosing , dead time , autoreclose blocking , sync check supervision , fuse saving scheme , leader-follower autoreclosing ,
    • IEEE Standard for Local and Metropolitan Area Networks--Timing and Synchronization for Time-Sensitive Applications - Corrigendum 1: Technical and Editorial Corrections 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Technical and editorial corrections to IEEE Std 802.1AS™-2020 are provided in this corrigendum.
      Subject(s) : Grandmaster Clock , IEEE 802.1AS™ , syntonization , synchronization , PTP End Instance , frequency offset , PTP Relay Instance , phase offset , Grandmaster PTP Instance , best master , time-aware system ,
    • IEEE/IEC International Standard Assessment of power density of human exposure to radio frequency fields from wireless devices in close proximity to the head and body (frequency range of 6 GHz to 300 GHz)--Part 1: Measurement procedure 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Subject(s) : IEC Standards , Radiation detection , Power system measurement , Human exposure , Density measurement , IEEE Standards , Frequency measurement ,
    • IEEE Standard for Preferred Power Supply (PPS) for Nuclear Power Generating Stations (NPGS) 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The design criteria of the preferred power supply (PPS) and its interfaces with the Class 1E power system, switchyard, transmission system, and alternate ac (AAC) source are described. This standard provides PPS requirements ...
      Subject(s) : switchyard , preferred power supply , transmission system , alternate ac source , AAC , IEEE 765 , PPS , NPGS , Class 1E , nuclear power generating station ,
    • Literature Review on Kinematic Properties of Road Users for Use on Safety-Related Models for Automated Driving Systems 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This document presents a review of relevant literature (e.g., standards, regulations, and scientific publications) that investigated kinematic behavior of road users. This review is intended to serve as a key contribution ...
      Subject(s) : IEEE 2846 , kinematic , white paper , standards , literature review , automated driving systems , behaviors , ADS , road users ,
    • IEEE Standard for Interconnection and Interoperability of Inverter-Based Resources (IBRs) Interconnecting with Associated Transmission Electric Power Systems 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Uniform technical minimum requirements for the interconnection, capability, and lifetime performance of inverter-based resources interconnecting with transmission and sub-transmission systems are established in this standard. ...
      Subject(s) : control , active power , positive-sequence , voltage , harmonic voltage , solar photovoltaic power , type test , ride-through , inverter , evaluation , frequency , wind power , interoperability , harmonic current , capability , standard , technical minimum , co-located resource , integrity , reference point of applicability , power quality , protection , frequency response , IEEE 2800 , primary frequency response , measurement accuracy , hybrid resource , weak grid , interconnection , performance , fast frequency response , enter service , energy storage , isolation device , negative-sequence , transient overvoltage , verification , modeling , inverterbased resource , reactive power , unbalance ,
    • IEEE Guide for Recommended Electrical Clearances and Insulation Levels in Air Insulated Electrical Power Substations - Redline 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2021
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide, covering three-phase ac systems from 1 kV to 800 kV, provides recommended electrical operating, safety clearances, and insulation levels in air-insulated electric supply substations; addresses insulation ...
      Subject(s) : IEEE 1427™ , substation , basic switching impulse insulation level (BSL) , clearances , insulation coordination , basic lightning impulse insulation level (BIL) , insulation levels ,
    • IEEE Standard for Wearable Consumer Electronic Devices--Overview and Architecture 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Wearable Consumer Electronic Devices (Wearables) are given an overview, terminology, and categorization in this standard. An architecture for a series of standard specifications that define technical requirements and testing ...
      Subject(s) : classification , information security , architecture , IEEE 360 , wireless , reliability , wearable , software , safety , application ,
    • IEEE Standard for Specifying Inertial Measurement Units (IMUs) 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Preparation of an inertial measurement unit (IMU) specification document is discussed in this standard. An outline is provided along with guidance for tailoring.
      Subject(s) : inertial system , inertial measurement unit , IMU , specification , IEEE 1780 ,
    • IEEE Standard for Local and metropolitan area networks-- Station and Media Access Control Connectivity Discovery Amendment 2: Support for Multiframe Protocol Data Units 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2022
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This amendment to IEEE Std 802.1AB(TM)-2016 specifies protocols, procedures and managed objects that support the transmission and reception of a set of Link Layer Discovery Protocol (LLDP) Type/Length/Values (TLVs) that ...
      Subject(s) : 802.1ABdh , 802.1ABTM , multiframe LLDPDUs , topology discovery , IEEE 802 , topology information , management information base , link layer discovery protocol ,