NACE RP0287

Field Measurement of Surface Profile of Abrasive Blast-Cleaned Steel Surfaces Using a Replica Tape - Item No: 21035

contributor author	NACE - NACE International
date accessioned	2017-09-04T16:41:42Z
date available	2017-09-04T16:41:42Z
date copyright	01/01/1987 (R 2002)
date issued	2002
identifier other	VPWLABAAAAAAAAAA.pdf
identifier uri	http://yse.yabesh.ir/std;query=autho162sAF679D4049A961598F1EFDEC014A0Facilities%114ngineering%20Command%22/handle/yse/105035
description abstract	General This standard describes a procedure for on-site measurement of the surface profile of abrasive blast-cleaned steel surfaces that have a surface profile, as defined in Section 2, between 38 and 114 Î¼m (1.5 and 4.5 mils). The procedure has been demonstrated to correlate well with the measurements obtained by the defined laboratory procedure on nonrusted panels prepared to NACE No. 1/SSPC⁽¹⁾-SP 5,¹ NACE No. 2/SSPC-SP 10,² or NACE No. 3/SSPC-SP 6.³ Suggestions are given regarding the implementation and use of this procedure. ⁽¹⁾ SSPC: The Society for Protective Coatings, 40 24th St., Pittsburgh, PA 15222.
language	English
title	NACE RP0287	num
title	Field Measurement of Surface Profile of Abrasive Blast-Cleaned Steel Surfaces Using a Replica Tape - Item No: 21035	en
type	standard
page	8
status	Active
tree	NACE - NACE International:;2002
contenttype	fulltext