NACE RP0287
Field Measurement of Surface Profile of Abrasive Blast-Cleaned Steel Surfaces Using a Replica Tape - Item No: 21035
Organization:
NACE - NACE International
Year: 2002
Abstract: General
This standard describes a procedure for on-site measurement of the surface profile of abrasive blast-cleaned steel surfaces that have a surface profile, as defined in Section 2, between 38 and 114 μm (1.5 and 4.5 mils). The procedure has been demonstrated to correlate well with the measurements obtained by the defined laboratory procedure on nonrusted panels prepared to NACE No. 1/SSPC(1)-SP 5,1 NACE No. 2/SSPC-SP 10,2 or NACE No. 3/SSPC-SP 6.3 Suggestions are given regarding the implementation and use of this procedure.
(1) SSPC: The Society for Protective Coatings, 40 24th St., Pittsburgh, PA 15222.
This standard describes a procedure for on-site measurement of the surface profile of abrasive blast-cleaned steel surfaces that have a surface profile, as defined in Section 2, between 38 and 114 μm (1.5 and 4.5 mils). The procedure has been demonstrated to correlate well with the measurements obtained by the defined laboratory procedure on nonrusted panels prepared to NACE No. 1/SSPC(1)-SP 5,1 NACE No. 2/SSPC-SP 10,2 or NACE No. 3/SSPC-SP 6.3 Suggestions are given regarding the implementation and use of this procedure.
(1) SSPC: The Society for Protective Coatings, 40 24th St., Pittsburgh, PA 15222.
Collections
:
Show full item record
contributor author | NACE - NACE International | |
date accessioned | 2017-09-04T16:41:42Z | |
date available | 2017-09-04T16:41:42Z | |
date copyright | 01/01/1987 (R 2002) | |
date issued | 2002 | |
identifier other | VPWLABAAAAAAAAAA.pdf | |
identifier uri | http://yse.yabesh.ir/std;query=autho162sAF679D4049A961598F1EFDEC014A0Facilities%114ngineering%20Command%22/handle/yse/105035 | |
description abstract | General This standard describes a procedure for on-site measurement of the surface profile of abrasive blast-cleaned steel surfaces that have a surface profile, as defined in Section 2, between 38 and 114 μm (1.5 and 4.5 mils). The procedure has been demonstrated to correlate well with the measurements obtained by the defined laboratory procedure on nonrusted panels prepared to NACE No. 1/SSPC(1)-SP 5,1 NACE No. 2/SSPC-SP 10,2 or NACE No. 3/SSPC-SP 6.3 Suggestions are given regarding the implementation and use of this procedure. (1) SSPC: The Society for Protective Coatings, 40 24th St., Pittsburgh, PA 15222. | |
language | English | |
title | NACE RP0287 | num |
title | Field Measurement of Surface Profile of Abrasive Blast-Cleaned Steel Surfaces Using a Replica Tape - Item No: 21035 | en |
type | standard | |
page | 8 | |
status | Active | |
tree | NACE - NACE International:;2002 | |
contenttype | fulltext |