درباره ما
NAVY - OS - Naval Surface Warfare Center (NSWCIHEODTD): Recent submissions
Now showing items 481-500 of 1094
-
DOD-A-82720
Abstract: This specification covers one type of room temperature curing, two-part, flexible, modified-epoxy adhesive. Intended Use: This adhesive is intended for use in assembly of the aft closure of the MK 56 DTRM ... -
MIL-DTL-32024
Abstract: This specification covers the requirements for the CCU-33/A Impulse Cartridge (see 6.1). Intended Use: The CCU-33/A impulse cartridge provides a power source for the rapid deployment of parachutes. ...Subject(s) : Aircrew escape system , Escape system , aircrew , Parachute deployment , -
MS603 REV B
Abstract: This specification sheet is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for the formula described herein shall consist of this specification sheet and its referenced ... -
MIL-C-81595
Abstract: This document governs the manufacture, assembly and preparation for delivery of the MARK 127 MOD 0 impulse cartridge and the methods of inspection and tests upon which product acceptance will be based. Intended ... -
MIL-PRF-18950A
Abstract: This specification establishes the requirements for high-capacity, anti-aircraft and illuminating projectiles inert parts, and is augmented by drawings and specifications shown on the list of drawings and specifications ...Subject(s) : Chemical composition , Mechanical properties , Metallic materials , Projectile rotating bands , -
MIL-A-82654
Abstract: '!his specification covers one type of atanized aluminum powder referred to herein as "the material".Intended Use: Aluminum powder in accordance with this specification is intended for use as an ingredient ... -
MIL-DTL-32113A
Abstract: This document gives the requirements for the manufacture, assembly, and packaging of the Initiator, Cartridge Actuated, JAU-74/A and the verification methods upon which product acceptance will be based.Intended ...Subject(s) : Aircrew Escape , CAD , NACES P3I , -
A-A-59139
Abstract: This commercial item description covers one type of atomized aluminum powder for use in explosives. Intended Use: The aluminum powder is intended for use in explosives. -
MIL-E-82590
Abstract: This specification establishes the environmental requirements and test procedures for all component parts and assemblies to be used in the Torpedo Mk 37. Individual specifications and NAVORD Drawings may reference this ...