درباره ما
MIL-PRF-38769D
MANUALS, TECHNICAL: WORK UNIT CODE - PREPARATION OF
Year: 1996
Abstract: This specification prescribes the requirements for the development and preparation of Work Unit Code (WUC) manuals for Air Force equipment.
The level of detail contained in this performance specification is necessary to comply with the requirements of the Joint Computer-aided Acquisition and Logistics Support (JCALS) system. Intended Use: WUC manuals are used to identify all -work unit- (support general and equipment identification), -unique data codes for MCS," "type maintenance," "action taken," "when discovered," and "how malfunctioned" codes that apply to the equipment covered by the manual. Under the Air Force data collection system, each maintenance action performed on Air Force equipment must be fully and accurately documented. The volume of data collected requires the use of Automatic Data Processing (ADP) techniques. The use of ADP equipment requires that the data input be coded in such a manner that it can be read by the data processing machines. Standard codes have been developed for recording the type of maintenance being performed, the action taken to correct a deficiency, when a deficiency was discovered, and the type of malfunction that occurred. Identification codes, called "work unit codes," are used to identify the specific assembly or part within an end item on which an action was performed.
The level of detail contained in this performance specification is necessary to comply with the requirements of the Joint Computer-aided Acquisition and Logistics Support (JCALS) system. Intended Use: WUC manuals are used to identify all -work unit- (support general and equipment identification), -unique data codes for MCS," "type maintenance," "action taken," "when discovered," and "how malfunctioned" codes that apply to the equipment covered by the manual. Under the Air Force data collection system, each maintenance action performed on Air Force equipment must be fully and accurately documented. The volume of data collected requires the use of Automatic Data Processing (ADP) techniques. The use of ADP equipment requires that the data input be coded in such a manner that it can be read by the data processing machines. Standard codes have been developed for recording the type of maintenance being performed, the action taken to correct a deficiency, when a deficiency was discovered, and the type of malfunction that occurred. Identification codes, called "work unit codes," are used to identify the specific assembly or part within an end item on which an action was performed.
Subject: Action taken code
Show full item record
| contributor author | AIR FORCE - 10 - Air Force Materiel Command Standardization Office (ComSO) | |
| date accessioned | 2017-09-04T15:50:10Z | |
| date available | 2017-09-04T15:50:10Z | |
| date copyright | 07/01/1996 | |
| date issued | 1996 | |
| identifier other | QGFAEAAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;query=autho162sear3FCDCAC426159DD6E273C9F4A/handle/yse/53227 | |
| description abstract | This specification prescribes the requirements for the development and preparation of Work Unit Code (WUC) manuals for Air Force equipment. The level of detail contained in this performance specification is necessary to comply with the requirements of the Joint Computer-aided Acquisition and Logistics Support (JCALS) system. Intended Use: WUC manuals are used to identify all -work unit- (support general and equipment identification), -unique data codes for MCS," "type maintenance," "action taken," "when discovered," and "how malfunctioned" codes that apply to the equipment covered by the manual. Under the Air Force data collection system, each maintenance action performed on Air Force equipment must be fully and accurately documented. The volume of data collected requires the use of Automatic Data Processing (ADP) techniques. The use of ADP equipment requires that the data input be coded in such a manner that it can be read by the data processing machines. Standard codes have been developed for recording the type of maintenance being performed, the action taken to correct a deficiency, when a deficiency was discovered, and the type of malfunction that occurred. Identification codes, called "work unit codes," are used to identify the specific assembly or part within an end item on which an action was performed. | |
| language | English | |
| title | MIL-PRF-38769D | num |
| title | MANUALS, TECHNICAL: WORK UNIT CODE - PREPARATION OF | en |
| type | standard | |
| page | 78 | |
| status | Active | |
| tree | AIR FORCE - 10 - Air Force Materiel Command Standardization Office (ComSO):;1996 | |
| contenttype | fulltext | |
| subject keywords | Action taken code | |
| subject keywords | How malfunctioned code | |
| subject keywords | Maintenance cost system | |
| subject keywords | Support general WUCs | |
| subject keywords | Type maintenance code | |
| subject keywords | Unique data codes | |
| subject keywords | When discovered code |