MIL-V-85245/1

Abstract

THIS SPECIFICATION IS APPROVED FOR USE BY ALL DEPARTMENTS AND AGENCIES OF THE DEPARTMENT OF DEFENSE. <br>THE COMPLETE REQUIREMENTS FOR PROCURING THE VALVE DESCRIBED HEREIN SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE IN EFFECT OF MIL-V-85245. <a><img alt="FIGURE" /></a> <a id="FOQPDAAAAAAAAAAA-X1" name="FOQPDAAAAAAAAAAA-X1">TABLE I. RELIEF VALVE CHARACTERISTICS.</a> </span><pre>DASH NUMBER HEX OR RATED FLOW PRESSURE SETTING RANGE, PSID TUBING A B C FLATS RATED OD MAX. &#177;.031 MIN. D FLOW CLASS A CLASS B CLASS C CLASS D DIA. +.002 GPM 500 TO 825 826 TO 1399 1400 TO 2299 2300 TO 3850 &#8722;.010 ---------------------------------------------------------------------------------------------------------------------------------- -A4 -B4 -C4 -D4 .250 1.000 4.000 .438 .688 2.5 -A6 -B6 -C6 -D6 .375 1.000 5.000 .500 .813 7.0 -A8 -B8 -C8 -D8 .500 1.375 6.000 .625 1.000 12.0 -A12 -B12 -C12 -D12 .750 1.375 7.000 1.750 1.375 32.0 -A16 -B16 -C16 -D16 1.000 1.375 7.000 1.750 1.750 48 NOTES: 1. DIMENSIONS IN INCHES, UNLESS OTHERWISE SPECIFIED. SEE ABOVE FIGURE. 2. TOLERANCES, DECIMALS &#177; .010, ANGLES &#177; 1&#176;. 3. UNLESS OTHERWISE SPECIFIED, SURFACE ROUGHNESS SHALL NOT EXCEED 125 MICROINCHES, PER MIL-STD-10. REMOVE ALL BURRS AND BREAK SHARP EDGES .005 MINIMUM. 4. MATERIAL SHALL BE IN ACCORDANCE WITH THE PROCUREMENT SPECIFICATION.</pre> <br> <br>