AWS - American Welding Society: Recent submissions

Now showing items 441-451 of 451

    • AWS LVOS 

      Type: standard
      Source: AWS - American Welding Society:;1983
      Organization : AWS - American Welding Society

    • AWS J1.1M/J1.1 

      Type: standard
      Source: AWS - American Welding Society:;2013
      Organization : AWS - American Welding Society

    • AWS QC12 

      Type: standard
      Source: AWS - American Welding Society:;1996
      Organization : AWS - American Welding Society

    • AWS D14.6/D14.6M 

      Type: standard
      Source: AWS - American Welding Society:;2012
      Organization : AWS - American Welding Society
      Abstract: This specification establishes minimum acceptable requirements for weld joint detail and fabrication by welding of rotating elements in new equipment. This specification also applies to the modification or repair by welding ...

    • AWS B1.11 

      Type: standard
      Source: AWS - American Welding Society:;2000
      Organization : AWS - American Welding Society
      Abstract: This guide includes an outline of the fundamental prerequisites for personnel performing visual examination of welds. Such prerequisites include physical limitations or capabilities, as well as technical knowledge, training, ...
      Subject(s) : discontinuities , equipment , instruments , nondestructive examination , records , surface conditions , visual examination , Visual inspection ,

    • AWS C2.25/C2.25M 

      Type: standard
      Source: AWS - American Welding Society:;2012
      Organization : AWS - American Welding Society
      Abstract: This specification prescribes requirements for the classification of thermal spray feedstock based on the as manufactured chemical composition. Thermal Spray Feedstock includes solid and composite wires and ceramic rods ...

    • AWS A2.4 

      Type: standard
      Source: AWS - American Welding Society:;2012
      Organization : AWS - American Welding Society
      Abstract: This standard presents a system for indicating welding, brazing, and nondestructive examination requirements. The system includes provisions for the graphical representation of welds, brazes, and nondestructive examination ...

    • AWS A5.10/A5.10M 

      Type: standard
      Source: AWS - American Welding Society:;2012
      Organization : AWS - American Welding Society
      Abstract: This standard specifies requirements for classification of solid wires and rods for fusion welding of aluminum and aluminum alloys. The classification of the solid wires and rods is based on their chemical composition. ...

    • AWS A5.32M/A5.32 

      Type: standard
      Source: AWS - American Welding Society:;2011
      Organization : AWS - American Welding Society
      Abstract: This Standard specifies requirements for the classification of gases and gas mixtures used in fusion welding and allied processes including, but not limited to:
      — gas tungsten arc welding — GTAW; ...

    • AWS B2.1-1-210 

      Type: standard
      Source: AWS - American Welding Society:;2001
      Organization : AWS - American Welding Society
      Abstract: The data to support this Standard Welding Procedure Specification (WPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding ...
      Subject(s) : allowable joint designs , base metal , carbon steel , consumable insert , filler metal , gas tungsten arc welding , manual welding , Welding Procedure Specification ,

    • AWS F2.2 

      Type: standard
      Source: AWS - American Welding Society:;2010
      Organization : AWS - American Welding Society
      Abstract: Abstract
      This chart provides minimum suggested protective lens shades and suggested comfort lens shades for a variety of commonly used welding and cutting processes.
      Subject(s) : Eye protection , lens shade ,