درباره ما
AWS - American Welding Society: Recent submissions
Now showing items 421-440 of 451
-
AWS PRGC
Abstract: Introduction
Corrosion, resulting in the severe degradation of materials, is one of the most expensive engineering problems in our industrial society; estimates have been made that the annual ... -
AWS D3.9
Abstract: This standard specifies the requirements for the classification of weld-through paint primers only. The paint primers are classified based on the maximum coating thickness for successful welding and the welding procedure ... -
AWS B2.1-1-202
Abstract: Abstract
This standard contains the essential welding variables for carbon steel in the thickness range of 1/8 through 3/4 inch, using manual shielded metal arc welding with E6010 (vertical downhill) ... -
AWS A4.3
Abstract: This standard prescribes a standard weld test assembly, a standard method of test specimen preparation, and two standard methods of analysis for determination of diffusible hydrogen from martensitic, bainitic, and ferritic ... -
AWS C6.1
Abstract: These recommended practices for friction welding are intended to serve as a basic guide for those interested in using any of the variations of this process as a method of joining two or more pieces.
Contained in this ...Subject(s) : direct drive friction welding , flywheel friction welding , friction forging , Friction welding , inertia friction welding , solid state bonding , spin welding , -
AWS A4.2M
Abstract: This standard specifies the method and apparatus for
— the measurement of the delta ferrite content, expressed as Ferrite Number (FN), in largely austenitic and duplex ferritic-austenitic stainless steel1) ...Subject(s) : austenitic stainless weld metal , delta ferrite , duplex stainless weld metal , Instrument calibration , stainless steel weld metal , -
AWS B2.1-4-221
Abstract: The data to support this Standard Welding Procedure Specification (SWPS) were derived from the above-listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding Research ... -
AWS PHB-3
Abstract: Introduction
This pocket handbook consists of selected welded joint details applicable to the welding of plate and shapes for structural applications. The joint details conform to the design and ... -
AWS D10.8
Abstract: These recommended practices apply to the arc welding of the following base-metal combinations:
(1) Similar chromium-molybdenum steels
(2) Dissimilar chromium-molybdenum steels
(3) Chromium-molybdenum to austenitic ...Subject(s) : Chromium-molybdenum steel pipe , chromium-molybdenum steel tubing , -
AWS B2.1-1-020
Abstract: The data to support this Standard Welding Procedure Specification (WPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding ...Subject(s) : allowable joint designs , Ar/CO2 shielded flux cored arc welding , base metal , carbon steel , filler metal , semi-automatic , Welding Procedure Specification , -
AWS C3.7M/C3.7
Abstract: This specification presents the minimum fabrication and quality requirements for brazing of aluminum and aluminum alloys. Its purpose is to standardize brazing process requirements and control brazed joint quality for all ... -
AWS D1.5M/D1.5
Abstract: Application
This code covers welding fabrication requirements applicable to welded highway bridges. The code is applicable to both shop and field fabrication of steel bridges and bridge components. ... -
AWS B2.1-8-025
Abstract: The data to support this Standard Welding Procedure Specification (SWPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding ... -
AWS UEAW
Abstract: Scope and Application
This Handbook gives recommendations for the ultrasonic examination of austenitic welds by manual scanning techniques which use the pulse-echo method and A-Scan presentation. The ... -
AWS C2.19/C2.19M
Abstract: This specification covers thermal spray processes for original equipment manufacturers (OEMs) and the repair of machinery components. The scope includes (1) recommended applications, (2) management and engineering requirements, ...