AWS D3.9

AWS - American Welding Society

Specification for Classification of Weld-Through Paint Primers - 1st Edition

Organization:

Year: 2010

Abstract: This standard specifies the requirements for the classification of weld-through paint primers only. The paint primers are classified based on the maximum coating thickness for successful welding and the welding procedure used during the classification test. This Standard provides a system for paint manufacturers to classify the weldability features of weldthrough paint primers. This Standard is limited to weld-through paint primers only and does not include galvanized or other types of protective coatings.
This standard makes sole use of the U.S. Customary units. Approximate mathematical equivalents in the International System of Units (SI) are provided for comparison in parentheses or in appropriate columns in tables and figures.
This Standard is not a safety document. Safety and health issues and concerns are beyond the scope of this standard, and therefore are not fully addressed herein. Safety and health information is available from other sources, including, but not limited to, ANSI Z49.1, Safety in Welding, Cutting, and Allied Processes, and applicable federal and state regulations.
The application of coatings and subsequent processing of coated products should observe safety and health precautions in the country-specific and supplier-specific Material Safety Data Sheets (MSDS) for each coating.
In addition to ANSI Z49.1, the AWS also publishes Safety and Health Fact Sheets.¹ These fact sheets are listed in Annex C.
Employers are also referred to the US Department of Labor Regulations. Particular reference is made to OSHA Shipyard Employment Standard 29CFR1915.53,² Welding, Cutting and Heating in Way of Preservative Coatings and OSHA Construction Regulation 29CFR1926.354, Welding, Cutting, and Heating in Way of Preservative Coatings.
¹ AWS standards are published by the American Welding Society, 550 N.W. LeJeune Rd., Miami, Fl 33126.
² Code of Federal Regulations (CFR) standards are published by the U.S. Government Printing Office, · 732 N. Capitol Street, NW,· Washington, DC 20401.

URI: http://yse.yabesh.ir/std;query=autho1826AF/handle/yse/15262

Collections :

AWS - American Welding Society

Show full item record

contributor author	AWS - American Welding Society
date accessioned	2017-09-04T15:16:07Z
date available	2017-09-04T15:16:07Z
date copyright	2010.01.01
date issued	2010
identifier other	MINERCAAAAAAAAAA.pdf
identifier uri	http://yse.yabesh.ir/std;query=autho1826AF/handle/yse/15262
description abstract	This standard specifies the requirements for the classification of weld-through paint primers only. The paint primers are classified based on the maximum coating thickness for successful welding and the welding procedure used during the classification test. This Standard provides a system for paint manufacturers to classify the weldability features of weldthrough paint primers. This Standard is limited to weld-through paint primers only and does not include galvanized or other types of protective coatings. This standard makes sole use of the U.S. Customary units. Approximate mathematical equivalents in the International System of Units (SI) are provided for comparison in parentheses or in appropriate columns in tables and figures. This Standard is not a safety document. Safety and health issues and concerns are beyond the scope of this standard, and therefore are not fully addressed herein. Safety and health information is available from other sources, including, but not limited to, ANSI Z49.1, Safety in Welding, Cutting, and Allied Processes, and applicable federal and state regulations. The application of coatings and subsequent processing of coated products should observe safety and health precautions in the country-specific and supplier-specific Material Safety Data Sheets (MSDS) for each coating. In addition to ANSI Z49.1, the AWS also publishes Safety and Health Fact Sheets.¹ These fact sheets are listed in Annex C. Employers are also referred to the US Department of Labor Regulations. Particular reference is made to OSHA Shipyard Employment Standard 29CFR1915.53,² Welding, Cutting and Heating in Way of Preservative Coatings and OSHA Construction Regulation 29CFR1926.354, Welding, Cutting, and Heating in Way of Preservative Coatings. ¹ AWS standards are published by the American Welding Society, 550 N.W. LeJeune Rd., Miami, Fl 33126. ² Code of Federal Regulations (CFR) standards are published by the U.S. Government Printing Office, · 732 N. Capitol Street, NW,· Washington, DC 20401.
language	English
title	AWS D3.9	num
title	Specification for Classification of Weld-Through Paint Primers - 1st Edition	en
type	standard
page	30
status	Active
tree	AWS - American Welding Society:;2010
contenttype	fulltext