درباره ما
AWS B2.1-1/8-231
Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1,Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8,Group 1),1/8 through 1-1/2 inch Thick, IN309, ER309, and E309-15, -16, or -17,or IN309, ER309(L), and ER309(L)-15, -16, or -17, As-Welded Condition, Primarily Pipe
Organization:
AWS - American Welding Society
Year: 2002
Abstract: The data to support this Standard Welding Procedure Specification (SWPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding Research Council. This SWPS is not valid using conditions and variables outside the ranges listed. The American Welding Society considers that this SWPS presents information for producing an acceptable weld using the conditions and variables listed. The user needs a significant knowledge of welding and accepts full responsibility for the performance of the weld and for providing the engineering capability, qualified personnel, and proper equipment to implement this SWPS.
Subject: allowable joint designs
Collections
:
-
Statistics
AWS B2.1-1/8-231
Show full item record
| contributor author | AWS - American Welding Society | |
| date accessioned | 2017-09-04T15:26:21Z | |
| date available | 2017-09-04T15:26:21Z | |
| date copyright | 2002.01.01 | |
| date issued | 2002 | |
| identifier other | NODOABAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;query=autho1826AF/handle/yse/27114 | |
| description abstract | The data to support this Standard Welding Procedure Specification (SWPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding Research Council. This SWPS is not valid using conditions and variables outside the ranges listed. The American Welding Society considers that this SWPS presents information for producing an acceptable weld using the conditions and variables listed. The user needs a significant knowledge of welding and accepts full responsibility for the performance of the weld and for providing the engineering capability, qualified personnel, and proper equipment to implement this SWPS. | |
| language | English | |
| title | AWS B2.1-1/8-231 | num |
| title | Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1,Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8,Group 1),1/8 through 1-1/2 inch Thick, IN309, ER309, and E309-15, -16, or -17,or IN309, ER309(L), and ER309(L)-15, -16, or -17, As-Welded Condition, Primarily Pipe | en |
| type | standard | |
| page | 20 | |
| status | Active | |
| tree | AWS - American Welding Society:;2002 | |
| contenttype | fulltext | |
| subject keywords | allowable joint designs | |
| subject keywords | austenitic stainless steel | |
| subject keywords | base metal | |
| subject keywords | carbon steel | |
| subject keywords | consumable insert | |
| subject keywords | filler metal | |
| subject keywords | gas tungsten arc welding | |
| subject keywords | manual welding | |
| subject keywords | standard welding procedure specification | |
| subject keywords | SWPS | |
| subject keywords | Welding procedure specification | |
| subject keywords | WPS |