درباره ما
DIN - Deutsches Institut für Normung e. V.: Recent submissions
Now showing items 201-220 of 22183
-
DIN EN ISO 3581
Abstract: Scope: This International Standard specifies requirements for classification of covered electrodes, based on the all-weld metal chemical composition, the type of electrode covering and other electrode properties, and the ... -
DIN EN 12503-2
Abstract: Scope: This European Standard specifies safety requirements (including performance requirements) for 3 types of high jump and pole vault mats used in school, training and competition (see Clause 4). This standard specifies ... -
-
DIN CEN/TS 16986
Abstract: Scope: This Technical Specification defines an application interface definition by selecting suitable options from the base standard EN ISO 12855:2015. Furthermore, it defines transfer mechanisms and supporting functions ... -
DIN EN 62056-5-3
Abstract: Scope: This part of IEC 62056 specifies the DLMS/COSEM application layer in terms of structure, services and protocols for COSEM clients and servers, and defines how to use the DLMS/COSEM application layer in various ... -
DIN EN 12897
Abstract: Scope: This European Standard specifies the constructional and performance requirements and methods of test for indirectly heated, unvented (closed) storage water heaters of up to 2 000 l volume suitable for connection to ... -
DIN 18353
Abstract: Scope: This standard deals with the laying of screed material on floors, including the application of any insulating, separating and protective layers or membranes. This standard does not cover the laying of dry screed ... -
DIN EN ISO 17575-3
Abstract: Scope: This part of ISO 17575 defines the content, semantics and format of the data exchange between a Front End (OBE plus optional proxy) and the corresponding Back End in autonomous toll systems. It defines the data ... -
DIN EN ISO 8502-2
Abstract: Scope: This part of ISO 8502 describes a method for the determination of chloride-containing salts that are readily soluble in water and are present on a steel surface. The method is also applicable to previously coated ... -
DIN ISO 18451-1
Abstract: Scope: Dieser Teil von ISO 18451 legt Begriffe fest, die auf dem Gebiet der Farbmittel, Farbstoffe und Füllstoffe verwendet werden. Bei einigen Begriffen wird auf ISO 4618 verwiesen, die auch Begriffe für Farbmittel ... -
DIN EN 1776
Abstract: Scope: This European Standard specifies functional requirements for the design, construction, testing, commissioning/decommissioning, operation, maintenance and, where appropriate, calibration, together with suitable ... -
DIN EN 1269
Abstract: Scope: This European Standard specifies two methods for the evaluation of impregnations or other treatments in needled floorcoverings by means of a soiling test. There is no correlation known between the two soiling methods. ... -
DIN EN ISO 4829-2
Abstract: Scope: This part of ISO 4829 specifies a spectrophotometric method for the determination of total silicon in steels using reduced molybdosilicate. The method is applicable to silicon contents between 0,01 % and 0,05 % (mass ... -
DIN EN 388
Abstract: Scope: This European Standard specifies requirements, test methods, marking and information to be supplied for protective gloves against the mechanical risks of abrasion, blade cut, tear, puncture and, if applicable, impact. ... -
DIN EN 15991
Abstract: Scope: This European Standard defines a method for the determination of the trace element concentrations of Al, Ca, Cr, Cu, Fe, Mg, Ni, Ti, V and Zr in powdered and granular silicon carbide. Dependent on element, wavelength, ... -
DIN 18354
Abstract: Scope: This standard specifies requirements relating to - the laying of mastic asphalt screed as specified in the DIN 18560 series of standards, - the use of mastic asphalt to protect waterproofing as specified in DIN ... -
DIN EN ISO 8537
Abstract: Scope: This International Standard specifies requirements and test methods for empty, sterile, single-use syringes, with or without needles, made of plastic materials and intended solely for the injection of insulin, with ... -
DIN EN ISO 1043-3
Abstract: Scope: This part of ISO 1043 provides uniform symbols for components of terms relating to plasticizers to form abbreviated terms. It includes, in general, only those abbreviated terms that have come into established use. ... -
DIN EN 1015-12
Abstract: Scope: This European Standard specifies a method for the determination of the adhesive strength between rendering and plastering mortars and a substrate. -
DIN EN 62769-2
Abstract: Scope: This part of IEC 62769 specifies the FDI Client. The overall FDI architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in this figure.