درباره ما
DIN - Deutsches Institut für Normung e. V.: Recent submissions
Now showing items 241-260 of 22183
-
-
DIN EN 1096-5
Abstract: Scope: This European Standard defines a test method to establish the self-cleaning performances for coatings on glass which utilize sun, rain or a combination of sun and rain to enhance the cleanliness of the glass. The ... -
DIN EN ISO 17575-2
Abstract: Scope: This part of ISO 17575 defines how to convey all or parts of the data element structure defined in other parts of ISO 17575 over any communication stack and media suitable for this application. It is applicable only ... -
DIN EN 81-73
Abstract: Scope: This European Standard specifies the special provisions and safety rules describing the behaviour of lifts in the event of fire in a building, on the basis of a recall signal(s) to the lift(s) control system. This ... -
LN 9109
Abstract: Scope: This Standard specifies dimensions and masses to elastomeric Strips made from materials as listed in clause 5. -
-
VG 95373-25
Abstract: Scope: Diese Norm gilt für neu zu entwickelnde, neu zu beschaffende sowie beizustellende Geräte für die Bundeswehr. Diese Norm legt Grenzwerte für den Kopplungswiderstand und das logarithmische ... -
DIN EN 15551
Abstract: Scope: This European Standard defines the requirements for buffers with 105 mm, 110 mm and 150 mm stroke for vehicles or units which use buffers and screw coupling. It covers the functionality, interfaces and testing ... -
DIN EN 16602-70-12
Abstract: Scope: This European Standard specifies the requirements for the supplier and PCB manufacturer for PCB design. This European Standard is applicable for all types of PCBs, including sequential, rigid and flexible PCBs, HDI ... -
DIN EN 937
Abstract: Scope: This European Standard is applicable to chlorine used for treatment of water intended for human consumption. It describes the characteristics of chlorine and specifies the requirements and the corresponding test ... -
DIN EN ISO 20504
Abstract: Scope: This International Standard describes procedures for determination of the compressive behaviour of ceramic matrix composite materials with continuous fibre reinforcement at room temperature. This method applies to ... -
DIN EN ISO 14120
Abstract: Scope: This International Standard specifies general requirements for the design, construction, and selection of guards provided to protect persons from mechanical hazards. This International Standard indicates other hazards ... -
DIN EN 13598-2
Abstract: Scope: This European Standard specifies the definitions and requirements for buried manholes and inspection chambers installed in non-pressure drainage and sewerage systems to a maximum depth of 6 m from ground level to ... -
DIN EN ISO 11073-20601
Abstract: Scope: Within the context of the ISO/IEEE 11073 personal health device standard family, this standard defines an optimized exchange protocol and modeling techniques to be used by implementers of personal health devices to ... -
DIN EN 4652-312
Abstract: Scope: Diese Europäische Norm legt die Eigenschaften von koaxialen, festen Steckverbindern mit quadratischem Montageflansch, 50 Ohm, mit Schraubkupplung (N-Schnittstelle), fest. Die Verbindung des Steckverbinders mit ... -
DIN EN 13121-3
Abstract: Scope: This European Standard gives requirements for the design, fabrication, inspection, testing and verification of GRP tanks and vessels with or without thermoplastics lining for storage or processing of fluids, factory ... -
DIN EN ISO 28921-1
Abstract: Scope: This part of ISO 28921 specifies requirements for design, dimensions, material, fabrication and production testing of isolation valves for low-temperature applications. It applies to gate, globe, check, butterfly ... -
DIN EN 62842
Abstract: Scope: Diese Internationale Norm legt das Verfahren zur Zuordnung von einem angeforderten Dateibereich ohne Fragmentierung fest, um die Notwendigkeit der Umverteilung fragmentierter Dateien im UDF-Dateisystem von Festplatten ... -
DIN EN 12200-1
Abstract: Scope: This European Standard specifies the requirements for pipes, fittings, brackets and the system of unplasticized poly(vinyl chloride) (PVC-U) intended for use as above-ground external rainwater piping systems. It ... -
DIN EN ISO 2719
Abstract: Scope: This International Standard describes three procedures, A, B and C, using the Pensky-Martens closed cup tester, for determining the flash point of combustible liquids, liquids with suspended solids, liquids that ...