درباره ما
MIL-DTL-85052/3C VALID NOTICE 1
Clamp, Loop, Tube 17-7 PH Cres, 500 Degrees F
Organization:
NAVY - AS - Naval Air Systems Command
Year: 2010
Abstract: Intended Use: These clamps are intended for use as follows: Temperature range: − 65 to + 500 °F. These clamps have cushions, which have been compounded for high temperature capability at the sacrifice of fluid resistance. It is recommended for use only in those areas with operating temperatures from 275 °F to 500 °F where fluid exposure is minimal. For application below 275 °F, the use of clamps with a higher degree of fluid resistance is recommended such as MIL-DTL-85052/1 or MIL-DTL-85052/2 clamps. Systems: All fluid and electrical systems application in high temperature areas. Vibration rating: Clamps are used at low, medium, and high vibration areas depending on mounting methods. The recommended mounting methods for various vibration areas are specified in 6.4 of the general specification.
Collections
:
-
Statistics
MIL-DTL-85052/3C VALID NOTICE 1
Show full item record
| contributor author | NAVY - AS - Naval Air Systems Command | |
| date accessioned | 2017-09-04T18:42:52Z | |
| date available | 2017-09-04T18:42:52Z | |
| date copyright | 01/13/2010 | |
| date issued | 2010 | |
| identifier other | ALVQPCAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;query=autho1826AF679D40527369728F1ED52F014A/handle/yse/224273 | |
| description abstract | Intended Use: These clamps are intended for use as follows: Temperature range: − 65 to + 500 °F. These clamps have cushions, which have been compounded for high temperature capability at the sacrifice of fluid resistance. It is recommended for use only in those areas with operating temperatures from 275 °F to 500 °F where fluid exposure is minimal. For application below 275 °F, the use of clamps with a higher degree of fluid resistance is recommended such as MIL-DTL-85052/1 or MIL-DTL-85052/2 clamps. Systems: All fluid and electrical systems application in high temperature areas. Vibration rating: Clamps are used at low, medium, and high vibration areas depending on mounting methods. The recommended mounting methods for various vibration areas are specified in 6.4 of the general specification. | |
| language | English | |
| title | MIL-DTL-85052/3C VALID NOTICE 1 | num |
| title | Clamp, Loop, Tube 17-7 PH Cres, 500 Degrees F | en |
| type | standard | |
| page | 1 | |
| status | Active | |
| tree | NAVY - AS - Naval Air Systems Command:;2010 | |
| contenttype | fulltext |