درباره ما
TIA TIA/EIA-455-158
FOTP-158 Measurement of Breakaway Frictional Force in Fiber Optic Connector Alignment Sleeves
Organization:
TIA - Telecommunications Industry Association
Year: 2001
Abstract: INTRODUCTION
Intent
The objective of this FOTP is to measure the breakaway frictional force between the ferrule and the sleeve in fiber optic connectors.
Background
The contact force between the mating ferrules in an optical connector is the difference between the friction force between the ferrule and the sleeve, and the spring force of the connector. To maintain contact the friction force must remain below the spring force. The procedures in this FOTP have been selected to estimate the maximum breakaway frictional force that will exist between the ferrule and the sleeve.
The mechanics of friction result in significant variations in the measurement of breakaway friction. The criteria to be applied to the results of these measurements must account for the spread that is inherent in the mechanism being measured. See Annex B
Description
The specimen is a connector alignment sleeve. The measurement is made with two gage pins inserted so they meet at the center of the sleeve. Force is applied between one of the gage pins and the sleeve as shown in Figure 1.
To account for possible asymmetry between the ends of the sleeve an equal number of measurements are made with the gage pin being removed from each end of the sleeve.
Intent
The objective of this FOTP is to measure the breakaway frictional force between the ferrule and the sleeve in fiber optic connectors.
Background
The contact force between the mating ferrules in an optical connector is the difference between the friction force between the ferrule and the sleeve, and the spring force of the connector. To maintain contact the friction force must remain below the spring force. The procedures in this FOTP have been selected to estimate the maximum breakaway frictional force that will exist between the ferrule and the sleeve.
The mechanics of friction result in significant variations in the measurement of breakaway friction. The criteria to be applied to the results of these measurements must account for the spread that is inherent in the mechanism being measured. See Annex B
Description
The specimen is a connector alignment sleeve. The measurement is made with two gage pins inserted so they meet at the center of the sleeve. Force is applied between one of the gage pins and the sleeve as shown in Figure 1.
To account for possible asymmetry between the ends of the sleeve an equal number of measurements are made with the gage pin being removed from each end of the sleeve.
Collections
:
-
Statistics
TIA TIA/EIA-455-158
Show full item record
| contributor author | TIA - Telecommunications Industry Association | |
| date accessioned | 2017-09-04T18:02:34Z | |
| date available | 2017-09-04T18:02:34Z | |
| date copyright | 11/01/1997 (R 2001) | |
| date issued | 2001 | |
| identifier other | GCHFTAAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;query=autho47037D83081D20686159DD6E273C9FCD0Facilities%20Engineering%20Command%226EFDEC9FCD/handle/yse/185609 | |
| description abstract | INTRODUCTION Intent The objective of this FOTP is to measure the breakaway frictional force between the ferrule and the sleeve in fiber optic connectors. Background The contact force between the mating ferrules in an optical connector is the difference between the friction force between the ferrule and the sleeve, and the spring force of the connector. To maintain contact the friction force must remain below the spring force. The procedures in this FOTP have been selected to estimate the maximum breakaway frictional force that will exist between the ferrule and the sleeve. The mechanics of friction result in significant variations in the measurement of breakaway friction. The criteria to be applied to the results of these measurements must account for the spread that is inherent in the mechanism being measured. See Annex B Description The specimen is a connector alignment sleeve. The measurement is made with two gage pins inserted so they meet at the center of the sleeve. Force is applied between one of the gage pins and the sleeve as shown in Figure 1. To account for possible asymmetry between the ends of the sleeve an equal number of measurements are made with the gage pin being removed from each end of the sleeve. | |
| language | English | |
| title | TIA TIA/EIA-455-158 | num |
| title | FOTP-158 Measurement of Breakaway Frictional Force in Fiber Optic Connector Alignment Sleeves | en |
| type | standard | |
| page | 18 | |
| status | Active | |
| tree | TIA - Telecommunications Industry Association:;2001 | |
| contenttype | fulltext |