درباره ما
ISO 16592
Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method - Second Edition
Organization:
ISO - International Organization for Standardization
Year: 2012
Abstract: This International Standard gives guidance on a method for the determination of the carbon content in steels containing other alloying elements (less than 1 % to 2 % by mass) using the calibration curve method. It specifies the sample preparation, X-ray detection, establishment of the calibration curve and the procedure for the determination of the uncertainty of the measured carbon content. It is applicable to steels containing a mass fraction of carbon of less than 1,0 %. The method is not applicable to steels with higher carbon contents, which could significantly affect the accuracy of the analysis results.
This International Standard applies to analyses performed using normal beam incidence and wavelengthdispersive X-ray spectrometry; it is not designed to be used for energy-dispersive X-ray spectrometry.
This International Standard applies to analyses performed using normal beam incidence and wavelengthdispersive X-ray spectrometry; it is not designed to be used for energy-dispersive X-ray spectrometry.
Collections
:
Show full item record
| contributor author | ISO - International Organization for Standardization | |
| date accessioned | 2017-09-04T18:48:54Z | |
| date available | 2017-09-04T18:48:54Z | |
| date copyright | 2012.08.01 | |
| date issued | 2012 | |
| identifier other | KQFXXEAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;query=autho47037D83081DAC4261598F1EFDEC014A0Facilities%20Engineering%20Command%22/handle/yse/230212 | |
| description abstract | This International Standard gives guidance on a method for the determination of the carbon content in steels containing other alloying elements (less than 1 % to 2 % by mass) using the calibration curve method. It specifies the sample preparation, X-ray detection, establishment of the calibration curve and the procedure for the determination of the uncertainty of the measured carbon content. It is applicable to steels containing a mass fraction of carbon of less than 1,0 %. The method is not applicable to steels with higher carbon contents, which could significantly affect the accuracy of the analysis results. This International Standard applies to analyses performed using normal beam incidence and wavelengthdispersive X-ray spectrometry; it is not designed to be used for energy-dispersive X-ray spectrometry. | |
| language | English | |
| title | ISO 16592 | num |
| title | Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method - Second Edition | en |
| type | standard | |
| page | 18 | |
| status | Active | |
| tree | ISO - International Organization for Standardization:;2012 | |
| contenttype | fulltext |