Now showing items 221-240 of 1186

    • TIA TIA-1137.300 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2009
      Organization : TIA - Telecommunications Industry Association
      Abstract: This document is part of a multi-part document consisting of multiple parts that together describes Ultra Mobile BroadbandTM1 Wireless IP Network operation.
      The scope of this document covers support for ...
    • TIA TIA-102.AABD-A-1 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2011
      Organization : TIA - Telecommunications Industry Association
      Abstract: Addendum Scope
      This addendum provides the following enhancements to the Trunking Procedures (TIA- 102.AABD-A) standard:
      1. Adds improved descriptions for Pre-Programmed Emergency Alarm (11.2.3) and ...
    • TIA TIA-41.750-E 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2010
      Organization : TIA - Telecommunications Industry Association
      Abstract: General
      WIN call and service logic processing encompasses call and connection processing in the SSF/CCF, service logic execution in the SCF, and the use of supporting resources and data in the SRF and ...
    • TIA TIA-1151 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2009
      Organization : TIA - Telecommunications Industry Association
      Abstract: Scope of This Document
      These technical requirements form a standard for signaling conformance in UMB data systems. These requirements ensure that compliant access terminals and compliant access networks ...
    • TIA TIA-1170 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2010
      Organization : TIA - Telecommunications Industry Association
      Abstract: This Standard detai ls definitions, methods of measurement, and minimum performance requirements for access networks. This Standard shares the purpose of [1] (and subsequent revisions thereof) by ensuring that an ...
    • TIA TIA/EIA/IS-707-A-2 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2001
      Organization : TIA - Telecommunications Industry Association
      Abstract: INTRODUCTION
      This addendum is being published to describe an additional data service that is available on a cdma2000 spread spectrum system complying with TIA/EIA/IS-2000-A, and to revise chapters included in ...
    • TIA TIA-41.540-E-1 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2012
      Organization : TIA - Telecommunications Industry Association
    • TIA EIA-424 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;1981
      Organization : TIA - Telecommunications Industry Association
      Abstract: This Standard details definitions and methods of measurement of characteristics of SSB transmitters and receivers or SSB/AM transmitters and receivers, operating in the SSB mode, intended for operation in the Class "D" ...
    • TIA TIA/EIA-136-740 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2001
      Organization : TIA - Telecommunications Industry Association
      Abstract: Introduction
      The System Assisted Mobile Positioning through Satellite (SAMPS) Teleservice defies the procedures and signaling for a handset-based positioning service. SAMPS supports various location-based ...
    • TIA TSB-179 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2010
      Organization : TIA - Telecommunications Industry Association
      Abstract: In the land mobile radio service there has historically been no clear relationship between the VSWR specifications of the individual components in the RF path and the expected resultant "system" VSWR at the bottom end of ...
    • TIA TIA-939 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2003
      Organization : TIA - Telecommunications Industry Association
      Abstract: General
      This standard specifies a procedure for a modem to automatically detect the modulation technique and data signaling rate of the modem it is connected with. When incorporated into a new modem, ...
    • TIA TIA-136-720-C 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2002
      Organization : TIA - Telecommunications Industry Association
      Abstract: Purpose and Scope
      This section describes a Teleservice that is designed to support Over-the-Air Activation (OTA). The Over-the-Air Activation Teleservice (OATS) supports data exchange between a mobile ...
    • TIA TIA-492CA00 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2002
      Organization : TIA - Telecommunications Industry Association
      Abstract: This Specification pertains specifically to Class IVa dispersion-unshifted single-mode optical fiber.
    • TIA TIA-102.AACA-2 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2003
      Organization : TIA - Telecommunications Industry Association
      Abstract: This addendum specifies a method to transport Over The Air Rekeying (OTAR) Key Management Messages (KMMs) between a Key Management Facility (KMF) and an Mobile Radio (MR) that is independent of the physical and data transport ...
    • TIA TIA-878-D 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2013
      Organization : TIA - Telecommunications Industry Association
      Abstract: This document provides an interoperability specification for a RAN that supports HRPD. The RAN architecture in this document logically locates the Session Control and Mobility Management (SC/MM) function in the Access ...
    • TIA TIA-485-A 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2012
      Organization : TIA - Telecommunications Industry Association
      Abstract: This Standard specifies the electrical characteristics of generators and receivers that may be employed when specified for the interchange of binary signals in multipoint interconnection of digital equipment. When implemented ...
    • TIA TIA-604-16-B 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2005
      Organization : TIA - Telecommunications Industry Association
      Abstract: FOCIS 16 presents the intermateability standard for simplex and duplex connectors with the commercial designation LSH. This standard is issued as a revision of TIA 604-16-A, Fiber Optic Connector Intermateability ...
    • TIA TIA-455-228 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2012
      Organization : TIA - Telecommunications Industry Association
      Abstract: In this procedure, a modulated light source at a given wavelength is coupled into the component under test, and the phase shift of the modulated signal exiting the fiber at that wavelength is recorded with respect to the ...
    • TIA TIA-707.03-B 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2010
      Organization : TIA - Telecommunications Industry Association
      Abstract: General Description 
      This chapter of IS-707 provides requirements for the Rm Interface, Service Selection methods, and AT Command processing required and optional for mobile stations ...
    • TIA TIA-455-111-A 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2003
      Organization : TIA - Telecommunications Industry Association
      Abstract: This part of IEC 60793 establishes uniform requirements for the mechanical characteristic fibre curl or latent curvature, in uncoated optical fibres. Fibre curl has been identified as an important parameter for minimizing ...