درباره ما
TIA - Telecommunications Industry Association: Recent submissions
Now showing items 201-220 of 1186
-
TIA TIA-455-219-A
Abstract: The purpose of the procedure is to assess end face geometry in guide pin based multifiber ferrules and connectors. The primary attributes are fiber position relative to the end face, either undercut or protrusion, end face ... -
TIA TIA-455-183
Abstract: The test procedure is intended to provide a type test which characterizes the effect on fiber attenuation due to hydrogen generated by the cable components only. The data must be used cautiously since such data does not ... -
TIA TSB-4940
Abstract: The guidance provided in this Telecommunications Systems Bulletin (TSB) is intended to address only the management of cyber security related risk derived from or associated with the operation and use of information technology ... -
TIA TIA/EIA-732-311
Abstract: Introduction
This Part defines the CDPD lower layer subprofiles for services and protocols in the Transport and Network layers. The CDPD Service Provider must select at least one subprofile from among ... -
TIA TIA/EIA/IS-787
Abstract: Introduction
Asynchronous Transfer Mode (ATM) technology was originally developed for the high-speed and low Bit Error Rate(BER) environment. As ATM technology was deployed, interest in using ... -
TIA TIA/EIA-136-370-D-1
Abstract: This standard provides an overview of EGPRS-136 which integrates the TIA/EIA-136 air interface with the General Packet Radio Service (GPRS) as specified by the European Telecommunications Standards Institute (ETSI) and the ... -
TIA TIA-102.CABC-B-1
Abstract: INTRODUCTION
This document has been developed with input from the APCO Project 25 Interface Committee (APIC) TDMA Task Group. The impetus behind the development of this document is the public safety ... -
TIA TIA-102.CACC-1
Abstract: FOREWORD
This document has been developed by TR8.19 (Wireline Interfaces) with inputs from the APCO Project 25 Interface Committee (APIC) Inter RF Sub-System Interface Task Group (ISSI TG) for publication ... -
TIA TIA-804-C
Abstract: This document is standardizes the presentation of digitized antenna patterns for antenna systems in the terrestrial Land Mobile Radio Service. According to FCC Rules and Regulations §90.7, the Land Mobile Radio Service ... -
TIA TIA/IS-707-A-3
Abstract: INTRODUCTION
General Description
This chapter defines requirements for support of high speed packet data transmission capability on cdma2000® spread spectrum systems. Packet ... -
TIA TIA-41.200-E
Abstract: This specification defines intersystem handoff by describing the information flows between functional entities which occur in a number of intersystem handoff scenarios. -
TIA TIA-876
Abstract: This standard defines a model of the characteristics of the North American access network that determine xDSL modem transmission performance. It is intended to be the basis for performance testing of systems consisting of ... -
TIA TIA/EIA-732-1026
Abstract: This Part is directed toward Circuit Switched Cellular Digital Packet Data (CS CDPD) Service Providers intending to build or purchase equipment for use in the CS CDPD internal network. This Part affects serving CMD-IS ... -
TIA TIA-1185.300
Abstract: Introduction
General Overview
The MAC Layer contains the rules governing operation of the Control Channel, the Access Channel, the Forward Traffic Channel, and the Reverse Traffic Channel.
This ... -
TIA TIA-440-B
Abstract: The purpose of this Standard is to define commonly used terms, symbols and abbreviations for fiber optic applications.
erms are arranged in alphabetical order and definitions follow the listed term without repeating ... -
TIA TSB-69.1-2
Abstract: Document Scope
The purpose of this document is to define the packet data interfaces, protocols and procedures required to support the optional packet services. The packet data interfaces are shown in ... -
TIA TIA/EIA/IS-713
Abstract: These technical requirements form a compatibility standard for an analog PCS cellular radio telecommunications system. Their purpose is to ensure that an MS can obtain service in any analog PCS cellular system manufactured ... -
TIA TSB-181-1
Abstract: This document provides the Network Architecture Model (NAM) for the Ultra Mobile Broadband (UMB) system.
PURPOSE
This document provides the Network Architecture Model (NAM) for the Ultra Mobile ...