درباره ما
Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage Systems, after Exposure to a Sodium Hydroxide Solution
ASTM E2098/E2098M-25
Organization:
ASTM - ASTM International
Year: 2025
Abstract: 5.1 Glass fiber reinforcing meshes are used to strengthen EIFS and EIFS with drainage. The reinforcing meshes are embedded into base coats that contain portland cement, which potentially exposes the glass fibers in the reinforcing meshes to weakening by the action of alkali. The breaking force following alkali exposure as determined by this method is a factor used to comparatively evaluate the alkali resistance of glass fiber reinforcing meshes in the laboratory. 5.2 This test method does not purport to simulate the conditions that may be encountered in service. The performance of an EIFS or EIFS with drainage is a function of many factors, such as proper installation, rigidity of supporting construction, and resistance of the system to deterioration by other causes.
Collections
:
-
Statistics
Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage Systems, after Exposure to a Sodium Hydroxide Solution
Show full item record
| contributor author | ASTM - ASTM International | |
| date accessioned | 2025-09-30T19:30:02Z | |
| date available | 2025-09-30T19:30:02Z | |
| date copyright | 2025 | |
| date issued | 2025 | |
| identifier other | e2098_e2098m-25.pdf | |
| identifier uri | http://yse.yabesh.ir/std;query=autho47037D83FCDCAC4261594EA7091BD298/handle/yse/343931 | |
| description abstract | 5.1 Glass fiber reinforcing meshes are used to strengthen EIFS and EIFS with drainage. The reinforcing meshes are embedded into base coats that contain portland cement, which potentially exposes the glass fibers in the reinforcing meshes to weakening by the action of alkali. The breaking force following alkali exposure as determined by this method is a factor used to comparatively evaluate the alkali resistance of glass fiber reinforcing meshes in the laboratory. 5.2 This test method does not purport to simulate the conditions that may be encountered in service. The performance of an EIFS or EIFS with drainage is a function of many factors, such as proper installation, rigidity of supporting construction, and resistance of the system to deterioration by other causes. | |
| language | English | |
| title | Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage Systems, after Exposure to a Sodium Hydroxide Solution | en |
| title | ASTM E2098/E2098M-25 | num |
| type | standard | |
| status | Active | |
| tree | ASTM - ASTM International:;2025 | |
| contenttype | fulltext | |
| scope | 1.1 This test method covers procedures for determining the breaking force of glass fiber mesh following their conditioning in an alkali solution. The method is applicable to glass fiber mesh used in Exterior Insulation and Finish Systems (EIFS) and EIFS with drainage with base coats that contain portland cement as an ingredient. 1.2 Breaking force is expressed both as force per unit width of mesh and as a percentage of the breaking force of the mesh that has not been exposed to alkali conditioning. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. | |
| identifier DOI | 10.1520/E2098_E2098M-25 |