درباره ما
MIL-PRF-62315C
HEATER ASSEMBLY, COMBUSTION VEHICULAR COMPARTMENT, 60,000 BTU/HR
Organization:
ARMY - AT - Tank-Automotive and Armaments Command
Year: 1997
Abstract: This specification establishes the performance, design, testing, manufacturing, and acceptance requirements for a forced air inlet personnel heater assembly, referred to herein as "heater" (see 6.1).
Heaters will be dual or single air of the following types (see 6.4.1 and 6.4.2):
Intended Use: The heater furnished under this specification is intended to supply warm air to the crew compartment of military vehicles. Type I heaters may be substituted for type II heaters. Type II heaters will not be substituted for type I heaters. Heaters are used on M992 Series FAASV and M109 Series SPH.
Heaters will be dual or single air of the following types (see 6.4.1 and 6.4.2):
Type I - Extended operating range. Type II - Standard operating range.
Intended Use: The heater furnished under this specification is intended to supply warm air to the crew compartment of military vehicles. Type I heaters may be substituted for type II heaters. Type II heaters will not be substituted for type I heaters. Heaters are used on M992 Series FAASV and M109 Series SPH.
Subject: Air discharge rate
Collections
:
Show full item record
| contributor author | ARMY - AT - Tank-Automotive and Armaments Command | |
| date accessioned | 2017-09-04T17:21:23Z | |
| date available | 2017-09-04T17:21:23Z | |
| date copyright | 07/25/1997 | |
| date issued | 1997 | |
| identifier other | ZSZAEAAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;query=autho54037D83FCDC527361598F1ED52F014A/handle/yse/144584 | |
| description abstract | This specification establishes the performance, design, testing, manufacturing, and acceptance requirements for a forced air inlet personnel heater assembly, referred to herein as "heater" (see 6.1). Heaters will be dual or single air of the following types (see 6.4.1 and 6.4.2): Type I - Extended operating range. Type II - Standard operating range. Intended Use: The heater furnished under this specification is intended to supply warm air to the crew compartment of military vehicles. Type I heaters may be substituted for type II heaters. Type II heaters will not be substituted for type I heaters. Heaters are used on M992 Series FAASV and M109 Series SPH. | |
| language | English | |
| title | MIL-PRF-62315C | num |
| title | HEATER ASSEMBLY, COMBUSTION VEHICULAR COMPARTMENT, 60,000 BTU/HR | en |
| type | standard | |
| page | 26 | |
| status | Active | |
| tree | ARMY - AT - Tank-Automotive and Armaments Command:;1997 | |
| contenttype | fulltext | |
| subject keywords | Air discharge rate | |
| subject keywords | Environmental conditions | |
| subject keywords | Fuel consumption | |
| subject keywords | Heat output | |
| subject keywords | Overheat switch | |
| subject keywords | Protective coating | |
| subject keywords | Smoke density | |
| subject keywords | Toxic fumes |