درباره ما
ARMY - AT - Tank-Automotive and Armaments Command: Recent submissions
Now showing items 501-520 of 832
-
MIL-DTL-62006C VALID NOTICE 1
Abstract: This specification covers oil cooler assemblies for air cooling engine and transmission oil (see 6.1), and individual cores which make up the assembly types.
The types and classes of oil coolers are as follows ...Subject(s) : Core , Heat rejection , Hydraulic pressure , Hydrostatic pressure , Pneumatic pressure , -
MIL-PRF-53051B VALID NOTICE 1
Abstract: This specification covers wheel-mounted, diesel-engine-driven, self-priming, centrifugal, four-inch and six-inch pumping assemblies for fuel and potable water service.
The pumping assemblies will be of the following ...Subject(s) : Pump , 350 GPM , Pump , 600 GPM , Pump , Centrifugal , Self-Priming , Pump , Fuel , Pump , Liquid Bulk Transfer , Pump , Water , -
MIL-PRF-62364B
Abstract: This specification covers two types of electromagnetic brake assemblies. Each, when electrically energized, releases a shaft to permit motion.When de-energized, the brake assemblies apply braking to the driving shaft to ...Subject(s) : Coil , Dielectric , Disc , Friction , Gearbox , Holding action , Pad , Slew , -
MIL-STD-1894B
Abstract: This standard provides standard reference radiographs and recommended radiographic inspection procedures for partial-penetration weldments in steel plate, casting, or forging, 0.5 to 2 inches (in.) (12.70 to 50.80 millimeters ...Subject(s) : Angle Beams , Arc welding , Discontinuity , Fusion Welding , Gas cavities , Inspection , Porosity , Unfused Area , Weldments , -
A-A-52443A
Abstract: This CID covers one type of silicone-base tire-mold lubricant furnished as a concentrated emulsion for further dilution with 100 or more parts of water. It is furnished in metal containers (with metal screw-top caps) of ... -
MIL-PRF-3150E
Abstract: This specification covers one grade of preservative lubricating oil.Intended Use: Oil covered by this specification is intended for the preservation of ferrous and non-ferrous metals and as a general purpose ...Subject(s) : viscosity , -
MIL-PRF-53013B VALID NOTICE 1
Abstract: This specification. covers a repair kit consisting of tools and materials necessary for permanent repair to the Inland Petroleum Distribution System (IPDS) 6-inch, lightweight, collapsible hose-line. The components are ...Subject(s) : Clamps , hose , Fuel , aviation , Fuel , diesel , -
MIL-PRF-62559A
Abstract: This specification covers a Vehicle Distribution Box, referred to as the VDB. Intended Use: VDBs manufactured under this specification are intended for use on military tracked vehicles in the Bradley Fighting ...Subject(s) : Electrical; vehicle power relay , Relay switching; lamps , indicator , starter , motor and fire suppressant , Transfer power relay , -
A-A-52477
Abstract: This CID covers two sizes of parking brake cable and conduit assemblies with loop-type eye end fittings. The cable and conduit assembly is capable of withstanding a load of 910 kilogram (kg). -
MIL-PRF-62550E
Abstract: This specification covers a forced draft and ventilation air personnel heater assembly, referred to as a "heater" (see 6.1).Subject(s) : Ventilation , -
MIL-HDBK-1897
Abstract: This handbook covers general tolerances applicable to ferrous and nonferrous as-cast investment castings.
The purpose of this handbook is to provide design engineers with the tolerance capabilities of investment casting ...Subject(s) : Draft , Gate , Lost wax , Mold , Riser , Runner , Sprue , -
MIL-PRF-62419B
Abstract: This specification covers composite material for use as a replacement of wood components, such as troop slats, seat racks, and staves in military vehicles.Intended Use: The composite materials covered in this ...Subject(s) : Cargo bodies , -
F-F-351F
Abstract: This specification covers oil filters and oil filter elements of bypass design; and also oil filter elements of the outside-to-inside flow-path type of full-flow design for installation on internal combustion engines to ...Subject(s) : Additive removal , Antidrain-back leakage test , Cover-spring force , Differential pressure , End load strength , Filtering ability , Media migration , Pressure resistance , Pullout device tension , Shock resistance , -
MIL-PRF-52343D
Abstract: This specification covers a repair kit consisting of tools and materials necessary for temporary and permanent repairs to 4-inch hoselines. The components are contained in a fitted storage chest. The kit is not intended ...Subject(s) : Burst repair , hose , Clamps , hose , 4-inch , Leak repair , hose , Patch , hose , Splice , hose ,