Now showing items 521-540 of 832

    • A-A-59326/13B 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2011
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification covers a male by external pipe thread adapter to be used in conjunction with pipes and fittings having internal pipe threads and female cam locking coupling halves.
    • A-A-52410 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1993
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: The General Services Administration has authorized the use of this commercial item description (CID) as a replacement for MIL-B-45326C(AT) which is canceled.
    • A-A-52533 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1995
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This CID covers requirements for platform hand trucks, with solid rubber tire or plastic tire wheels. The trucks are intended for carrying light items over short distances.
    • A-A-59338A VALID NOTICE 2 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2009
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • MIL-PRF-12647D VALID NOTICE 1 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2004
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • MIL-DTL-62422D 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2010
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification covers laser hazard protection filters used in unity vision devices.Intended Use: Filters covered by this specification are intended for use in unity vision devices in combat type vehicles. ...
      Subject(s) : Coating , Combat vehicles , Glass substrate , Hybrid , Interference , Multilayer , Unity vision devices ,
    • A-A-52493 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1994
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This CID covers rigid rod end clevises. The items are intended to be attached to a shaft or rod by pinning to provide a means of fastening or attaching the shaft or rod to another part.
    • MIL-DTL-12109D SUPP 1 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1998
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • A-A-52555 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1996
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This CID covers a forged-steel, burton-style, hoist hook.
    • MIL-DTL-62740A 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1998
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification covers a Special Circuits Printed Wiring Assembly referred to herein as the PWA. This is one of six printed wiring assemblies which comprise the Simplified Test Equipment/Internal Combustion ...
      Subject(s) : Automatic Testing Equipment (ATE) test , Ignition inhibits , Ignition signal outputs , Simplified Test Equipment/Internal Combustion Engine - Reprogrammable (STE/ICE-R) , Vehicle Test Meter (VTM) ,
    • A-A-52524/8 VALID NOTICE 2 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2008
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • MIL-DTL-12109/13A 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1998
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
      The requirements for acquiring the product described herein shall consist of this specification and the issue of ...
    • A-A-59326/21B 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2011
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • A-A-52468 VALID NOTICE 2 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2009
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • MIL-S-53012 (1) 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1983
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • MIL-PRF-46736E VALID NOTICE 1 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2008
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification covers dry type air cleaner filter elements used in single and multi-stage air cleaners (see 6.1). Intended Use: The filter elements are military unique because of its applications ...
      Subject(s) : Diesel engine , Gasoline engine , Impurities , Material , Porous , Purification ,
    • MIL-PRF-46750E VALID NOTICE 2 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2009
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
    • MIL-DTL-32169 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2004
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification covers roadwheels for use on the Bradley Fighting Vehicle. These are metal wheels with bonded polyurethane tires (see 6.1). For the purpose of this specification polyurethane may be any form of ...
      Subject(s) : Roadwheels , Thermoplastic resins , Thermosetting resins ,
    • MIL-PRF-32243 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2009
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This standard establishes, unless otherwise specified, the minimum requirements for engineering acceptance for the operation, performance, and reliability of what is commonly termed as the seven (7) inch round Forward ...
      Subject(s) : Water submersion test ,
    • A-A-52423 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;1993
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: The General Services Administration has authorized the use of this commercial item description (CID) as a replacement for MIL-P-62156B(AT) which is canceled.