درباره ما
MIL-PRF-32213
LIGHT EMITTING DIODE (LED) CLEARANCE/ SIDEMARKER AND IDENTIFICATION LAMPS
Organization:
ARMY - AT - Tank-Automotive and Armaments Command
Year: 2009
Abstract: This standard establishes, unless otherwise specified, the minimum requirements for engineering acceptance for the operation, performance, and reliability of Exterior Lighting Devices, for military vehicles, with Light Emitting Diodes as the base of their technology for illumination and compliance with applicable SAE, United States FMVSS, Canadian CMVSS, STANAG, MIL Standards and Military Performance Specifications. The lamps will be designed to conform to the photometric requirements of this standard and the associated standards referenced within this document where applicable. Representative production level samples will be used for verification of compliance as specified below in this document.Intended Use: LED lamps covered by this performance specification are intended primarily for the purpose of replacing current incandescent Clearance/ Sidemarker or Identification lamps. LED technology that is properly designed, is not vulnerable to shock and vibration and therefore performs much better in severe end-use environments. By converting incandescent lamp products to LED, the lamps often last the life of the vehicle thus eliminating maintenance and field service issues.
Subject: Water submersion test
Collections
:
Show full item record
| contributor author | ARMY - AT - Tank-Automotive and Armaments Command | |
| date accessioned | 2017-09-04T16:10:43Z | |
| date available | 2017-09-04T16:10:43Z | |
| date copyright | 03/12/2009 | |
| date issued | 2009 | |
| identifier other | SKEOLCAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;query=autho54037D83FCDC527361598F1ED52F014A/handle/yse/73970 | |
| description abstract | This standard establishes, unless otherwise specified, the minimum requirements for engineering acceptance for the operation, performance, and reliability of Exterior Lighting Devices, for military vehicles, with Light Emitting Diodes as the base of their technology for illumination and compliance with applicable SAE, United States FMVSS, Canadian CMVSS, STANAG, MIL Standards and Military Performance Specifications. The lamps will be designed to conform to the photometric requirements of this standard and the associated standards referenced within this document where applicable. Representative production level samples will be used for verification of compliance as specified below in this document.Intended Use: LED lamps covered by this performance specification are intended primarily for the purpose of replacing current incandescent Clearance/ Sidemarker or Identification lamps. LED technology that is properly designed, is not vulnerable to shock and vibration and therefore performs much better in severe end-use environments. By converting incandescent lamp products to LED, the lamps often last the life of the vehicle thus eliminating maintenance and field service issues. | |
| language | English | |
| title | MIL-PRF-32213 | num |
| title | LIGHT EMITTING DIODE (LED) CLEARANCE/ SIDEMARKER AND IDENTIFICATION LAMPS | en |
| type | standard | |
| page | 16 | |
| status | Active | |
| tree | ARMY - AT - Tank-Automotive and Armaments Command:;2009 | |
| contenttype | fulltext | |
| subject keywords | Water submersion test |