درباره ما
ECA RS-406
General Document for Connectors, Electric, Printed- Wiring Board - Stabilized: April 2013
Organization:
ECIA - Electronic Components Industry Association
Year: 2013
Abstract: This document defines the recommended requirements for multi-contact electric connectors for the purpose of adapting electric conductors to printed-wiring boards, and for the purpose of interconnecting one printed-wiring board to another. It is intended that only those requirements that apply to a particular application need be tested.
Any deviations from this document shall be considered as negotiable.
Purpose: The intent of this document is to provide guidelines by which the user may develop a connector specification. It is also the intent of this document to provide information to be used in the selection of printed circuit connectors.
Types: The type describes the general configuration and intended use.
Type I One-piece connector
Type II Two-piece connector
Classes: See Table I
Size: The size of the connector defines the thickness of the applicable pluggable printed wiring board.
Contact Spacing: The contact spacing centerline to centerline defines the spacing between adjacent contacts. Spacings indicated are recommended standards.
Any deviations from this document shall be considered as negotiable.
Purpose: The intent of this document is to provide guidelines by which the user may develop a connector specification. It is also the intent of this document to provide information to be used in the selection of printed circuit connectors.
Types: The type describes the general configuration and intended use.
Type I One-piece connector
Type II Two-piece connector
Classes: See Table I
Size: The size of the connector defines the thickness of the applicable pluggable printed wiring board.
Contact Spacing: The contact spacing centerline to centerline defines the spacing between adjacent contacts. Spacings indicated are recommended standards.
Collections
:
Show full item record
| contributor author | ECIA - Electronic Components Industry Association | |
| date accessioned | 2017-09-04T15:09:18Z | |
| date available | 2017-09-04T15:09:18Z | |
| date copyright | 01/08/1973 (S 2013) | |
| date issued | 2013 | |
| identifier other | LNQECAAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;query=authoCA5893FD081D527369727A00D52FAB6A/handle/yse/7320 | |
| description abstract | This document defines the recommended requirements for multi-contact electric connectors for the purpose of adapting electric conductors to printed-wiring boards, and for the purpose of interconnecting one printed-wiring board to another. It is intended that only those requirements that apply to a particular application need be tested. Any deviations from this document shall be considered as negotiable. Purpose: The intent of this document is to provide guidelines by which the user may develop a connector specification. It is also the intent of this document to provide information to be used in the selection of printed circuit connectors. Types: The type describes the general configuration and intended use. Type I One-piece connector Type II Two-piece connector Classes: See Table I Size: The size of the connector defines the thickness of the applicable pluggable printed wiring board. Contact Spacing: The contact spacing centerline to centerline defines the spacing between adjacent contacts. Spacings indicated are recommended standards. | |
| language | English | |
| title | ECA RS-406 | num |
| title | General Document for Connectors, Electric, Printed- Wiring Board - Stabilized: April 2013 | en |
| type | standard | |
| page | 0 | |
| status | Active | |
| tree | ECIA - Electronic Components Industry Association:;2013 | |
| contenttype | fulltext |