درباره ما
MIL-C-22226A
COPPER NICKEL MANGANESE ALLOY BARS, PLATES, AND SHEETS, LOW MAGNETIC EFFECT (FOR SPECIAL PURPOSE TOOLS AND EQUIPMENT)
Organization:
NAVY - OS - Naval Surface Warfare Center (NSWCIHEODTD)
Year: 1973
Abstract: This specification covers a 60-percent copper, 20-percent nickel, 20-percent manganese alloy (see table I) having low magnetic permeability and capable of developing high strengths by heat treatment. (See 6.1.)
The copper-nickel-manganese alloy covered by this specification shall be of one composition and shall be furnished in the following forms and tempers, as specified (see 6.2):
Intended Use: The material covered by this specification is intended for special purpose tools and equipment where minimum magnetic effects are required. The limits of magnetic effect are far more stringent than those required for general purpose "nonmagnetic" tools.
The copper-nickel-manganese alloy covered by this specification shall be of one composition and shall be furnished in the following forms and tempers, as specified (see 6.2):
Form: 1. Bar 2. Plate 3. Sheet Temper: Condition R. Hot rolled Condition A. Hot rolled and solution treated Condition H. Hot rolled, solution treated, and cold worked.
Intended Use: The material covered by this specification is intended for special purpose tools and equipment where minimum magnetic effects are required. The limits of magnetic effect are far more stringent than those required for general purpose "nonmagnetic" tools.
Collections
:
Show full item record
| contributor author | NAVY - OS - Naval Surface Warfare Center (NSWCIHEODTD) | |
| date accessioned | 2017-09-04T18:11:13Z | |
| date available | 2017-09-04T18:11:13Z | |
| date copyright | 02/22/1973 | |
| date issued | 1973 | |
| identifier other | GZELDAAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;query=authoCA5893FD69B749A96159DD6E273C9FCD/handle/yse/194208 | |
| description abstract | This specification covers a 60-percent copper, 20-percent nickel, 20-percent manganese alloy (see table I) having low magnetic permeability and capable of developing high strengths by heat treatment. (See 6.1.) The copper-nickel-manganese alloy covered by this specification shall be of one composition and shall be furnished in the following forms and tempers, as specified (see 6.2): Form: 1. Bar 2. Plate 3. Sheet Temper: Condition R. Hot rolled Condition A. Hot rolled and solution treated Condition H. Hot rolled, solution treated, and cold worked. Intended Use: The material covered by this specification is intended for special purpose tools and equipment where minimum magnetic effects are required. The limits of magnetic effect are far more stringent than those required for general purpose "nonmagnetic" tools. | |
| language | English | |
| title | MIL-C-22226A | num |
| title | COPPER NICKEL MANGANESE ALLOY BARS, PLATES, AND SHEETS, LOW MAGNETIC EFFECT (FOR SPECIAL PURPOSE TOOLS AND EQUIPMENT) | en |
| type | standard | |
| page | 8 | |
| status | Active | |
| tree | NAVY - OS - Naval Surface Warfare Center (NSWCIHEODTD):;1973 | |
| contenttype | fulltext |