درباره ما
AIR FORCE - 82 - San Antonio Air Logistics Center: Recent submissions
Now showing items 101-120 of 216
-
MIL-C-38351A
Abstract: This specification covers requirements for two types and three classes of aromatic polyamide cloth.
The aromatic polyamide cloth shall be of the following types and classes, as specified (see 6.2)....
-
MIL-L-7158E
Abstract: This specification covers 24-inch, rigid, drum-type, rotating beacon lights for use by the Department of Defense and the Federal Aviation Agency in locating airports and airways. Intended Use: The lights ... -
MIL-B-1107G
Abstract: This specification covers an adjustable belt, in one type and size, made of cotton webbing. Intended Use: The belt covered by this specification is worn primarily by military personnel armed with a pistol ...Subject(s) : Belt , adjustable , Belt , fasteners - brass , Belt , individual equipment , M-1936 , Colors - olive drab and white , Cotton , webbing , Eyelets top and bottom edges , Military personnel , Thread , polyester , -
MIL-P-10067A
Abstract: This specification covers 14-millimeter, nonseparable, shielded and unshielded, spark plugs. Intended Use: - Spark plugs covered by this specification are intended for use in military internal-combustion ... -
MIL-C-83141A
Abstract: This specification covers the requirements for two types of fire-resistant, summer, men\'s, flying coveralls. Intended Use: The coveralls covered by this specification are intended to be worn as an outer ... -
A-A-58012
Abstract: This CID describes the minimum requirements for a Test Set, Interface Bus used to test parallel/BCD, IEEE 488, RS-232-C, and CIIL electronic test interfaces. Equipment covered by this CID will be commercially available ... -
MIL-S-25073A
Abstract: This specification covers two types of adjustable, long range aircraft pilot's seats.
Pilot seats covered by this specification shall be of the following types.
Type I - For use in long-range helicopters.
Type ... -
MIL-C-25014
Abstract: This specification establishes the general requirements for flexible tube couplings for aircraft fuel systems.
Flexible tube couplings shall be capable of joining standard tubing and fitting ends and shall be of the ... -
MIL-PRF-83831A
Abstract: This specification covers one type of floor mounted, manually operated, nonrecirculating water base solvent spray booth for the cleaning of electronic measuring instruments. Intended Use: The booth is intended ...Subject(s) : Air dry gun , Enclosure , Exhausted , Regulator , Spray Gun , Turntable , -
MIL-Y-1140H
Abstract: This specification primarily covers the basic forms of untreated glass fiber used by themselves or as components of other materials. Intended Use: The materials of this specification are, in general, used ... -
A-A-58011
Abstract: The General Services Administration has authorized the use of this Commercial Item Description. -
MS26579
Abstract: This standard has been approved by the USAF (11) and the Department of the Navy and is mandatory for use by that activity. All other military activities are required to employ this standard where suitable. -
MIL-B-25337B
Abstract: This specification covers the general requirements for metal vacuum bottle assemblies for the purpose of storing and dispensing hot or cold liquids in aircraft. The assemblies are designed for use while installed either ...