درباره ما
AIR FORCE - 82 - San Antonio Air Logistics Center: Recent submissions
Now showing items 121-140 of 216
-
A-A-59534
Abstract: This Commercial Item Description (CID) covers the general requirements for a portable refrigerant reclaimer (FR) recovery and recycling center. The FR will be used to recover and recycle refrigerants such as R-12, R-22, ... -
MIL-L-9158
Abstract: This specification covers one type of ultra-violet cockpit lighting set, designated Type B-1. Intended Use: The Type B-1 lighting set covered by this specificat is intended for use as an instrument lighting ... -
MIL-B-87258
Abstract: This specification covers the requirements for a mummy shaped, arctic survival sleeping bag used in cold weather aircraft survival kits. The pressure/vacuum packed sleeping bags are available in one size, 12 × 12 ...Subject(s) : Copper Man G.E. Cat PX15A4 , goose down insulating material , mummy shaped bag , passive container , survival kit , -
MIL-HDBK-349
Abstract: This handbook focuses primarily on the requirements for fabrication and inspection for acceptance of adhesive bonded, aluminum faced, non perforated aluminum honeycomb core sandwich assemblies intended for use as aircraft ...Subject(s) : APPLICABLE DOCUMENTS , CONSUMABLE MATERIALS , CURE CYCLE MALFUNCTION , HONEYCOMB CORE REWORK , INSPECTION LIMITS , MATERIALS , QUALIFICATION , SPECIMEN RETENTION , SURFACE PREPARATION , -
MIL-T-83273
Abstract: This specification covers a four-wheel, four-wheel drive, 500-gpm pumping capacity, fire fighting truck designated A/S32P-8. Intended Use: The A/S32P-8 truck is intended to be used as an air transportable ... -
MIL-R-8236F
Abstract: This specification establishes the dynamic and static performance criteria and testing requirements for 6 types of shoulder harness inertia reels and subassemblies thereof, for military aircraft. Intended Use: ...Subject(s) : Acceleration , Automatic inertia locking mechanism , Certification , Flight critical components , Housing subassembly , Human restraint , Inertia-lock reel , Locking mechanism , Multidirectional , Omnidirectional , Unidirectional , -
MIL-PRF-83766B
Abstract: The filler and pressurization unit covered by this document will be operated in hangars, flightlines, and flight decks for servicing aircraft hydraulic systems with pressures from 0-3,000 psi. Intended Use: ...Subject(s) : Brakes , Filter , Gage , Hose , Hydraulic , Pump , Reservoir , Tires , Valves , Wheels , -
A-A-50749
Abstract: This Commercial Item Description (CID), describes a current-voltage standard for DC voltage ratio accuracy. The current-voltage provides internal switching for calibrating the 100 mV, 1V, 10V, 100V and 1000 volt ranges of ... -
A-A-59149
Abstract: This commercial item description covers an eight channel power line monitor. This CID is meant as a minimum requirement for the power line monitor in which only those manufacturers that meet or surpass the following ... -
A-A-58035
Abstract: This CID describes a synthesized signal generator which operates from 2.0 GHz to 8.4 GHz and has AM, FM and pulse modulation capabilities. This is a general purpose signal generator. This CID is meant as a minimum ... -
A-A-59407A
Abstract: This Commercial Item Description (CID) outlines the minimum technical and performance requirements for a Radio Test Set Group used to verify, test, and repair Life Support survival radios such as the AN/PRC-112, AN/PRC-90-2, ... -
MIL-D-9227A
Abstract: This specification covers one type of a dynamotor high voltage power supply, designated Dynamotor DY-76A/AIC-10. Dynamotor DY-76A/AIC-10 is one item of Inter communication Set AN/AIC-10. Intended Use: Dynamotor ...