درباره ما
AIR FORCE - 82 - San Antonio Air Logistics Center: Recent submissions
Now showing items 141-160 of 216
-
MIL-T-5677B
Abstract: This specification establishes the requirements for aircraft wire-cable thimbles to be furnished in the following grades, as specified:Grade A - Carbon Steel Grade B - Corrosion-Resisting Steel ...
-
A-A-50743A
Abstract: The General Services Administration has authorized the use of this Commercial Item Description. -
A-A-58074
Abstract: This commercial item description covers the minimum performance requirements for a portable ultrasonic test set used for ultrasonic bond testing equipment of metallic and nonmetallic composite material. -
MIL-T-4776
Abstract: This specification covers the requirements for a 4-wheel, 2-wheel steerable, low silhouette enclosed body trailer having a capacity of 4,500 pounds. Intended Use: The trailer covered by this specification ... -
MIL-PRF-83041C
Abstract: This performance specification outlines the minimum requirements for a horizontal or vertical, liquid fuel separator with a maximum flow rate of 600 gallons per minute (gpm) ± 10%. This FFU-15/E filter separator is ...Subject(s) : Air eliminator , Coalescer , Differential pressure gauge , Ground rod , Spider assembly , Water slug valve , -
A-A-58033
Abstract: This Commercial Item Description (CID), describes a cable tester. This CID is meant as a minimum requirement for the cable tester in which only those manufacturers which meet or exceed the following requirements are ... -
MIL-T-26310A
Abstract: This specification covers an aircraft and missile engine lift trailer, designated ETU-9/E. Intended Use: The ETU-9/E trailer covered by this specification is intended for use in installing or removing aircraft ... -
MIL-C-9544B
Abstract: This specification covers one type of ultra high frequency (UHF) antenna multicoupler, designated Coupler, Antenna CU-547( )/GR, hereinafter referred to as the "antenna coupler". Intended Use: The Coupler, ... -
A-A-58039
Abstract: This CID describes a Primary DC Ratio Voltage Standard and is meant as a minimum requirement for the Voltage Standard in which only those manufacturers that meet or surpass the following requirements are qualified per this CID. -
MIL-C-7020H
Abstract: This specification covers rip stop and twill weave nylon parachute cloth.
There shall be six types of nylon cloth of the following types and weaves, as specified (See 6.2).Type I - 1.1 ...
Subject(s) : Aging , Air Permeability , Filling , Length , Selvage , Tear Strength , Warp , Weight , Yarn , Yarn , -
A-A-58073
Abstract: This Commercial Item Description (CID) covers the minimum performance and technical requirements for a portable test set, ultrasonic for nondestructive flaw testing and thickness gauging of metallic and nonmetallic materials. -
MIL-HDBK-863
Abstract: This standard establishes the requirements for specific preparation and specific presentation of engineering data for aerospace vehicles and aerospace support applications. This engineering data (wiring data and schematic ... -
MIL-J-8279G
Abstract: This specification covers one type of intermediate jacket designated type MA-1 and furnished in the following sizes, as specified.Intended Use: The jacket covered by this specification is intended to be worn ...