IEEE - The Institute of Electrical and Electronics Engineers, Inc.: Recent submissions

Now showing items 1021-1040 of 2832

    • IEEE Guide for Installation and Maintenance of Liquid-Immersed Power Transformers 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide provides guidance and recommended practices on the installation and maintenance of liquid-immersed power transformers rated 501 kVA and above with secondary voltages of 1000 V and above. This guide covers the ...
      Subject(s) : installation , liquid-immersed transformer , maintenance , liquid-immersed transformer , liquid processing , testing , transformer , IEEE Standards , Liquid cooling , Power transformers , Maintenance engineering ,

    • IEEE Recommended Practice for Routing Packets in IEEE 802.15.4(TM) Dynamically Changing Wireless Networks - Amendment 1: Fully Defined Use of Addressing and Route Information Currently in IEEE Std 802.15.10 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This amendment to IEEE Std 802.15.10 fully defines how the addressing and route information (already defined in the recommended practice) are to be used by the routing modes (also currently defined in the recommended ...
      Subject(s) : amendment , discovery and addition of new nodes , IEEE 802.15.4 , IEEE 802.15.10 , IEEE 802.15.10a , dynamic route reconfiguration , frame forwarding , purging of inactive routes , real time link status information exchange , re-establishment of broken/lost routes , route establishment , single hop appearance at the networking layer (not breaking standard Layer 3 mechanisms) , support for broadcast , support for multicast , IEEE Standards , Local area networks , Metropolitan area networks , Broadcasting , Multicast communication , Information exchange ,

    • IEEE Recommended Practice for Conducting Motor-Starting Studies and Analysis of Industrial and Commercial Power Systems 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Activities related to motor-starting studies, including design considerations for new systems, analytical studies for existing systems, as well as operational and model-validation considerations for industrial and commercial ...
      Subject(s) : adjustable speed drive , dynamic motor starting , IEEE 3002.7 , motor acceleration , motor protection , motor reacceleration , motor starting , reduced-voltage starters , soft-starters , static motor starting , variable frequency drive , voltage flicker , IEEE Standards , Industrial power systems , Computational modeling , Analytical models , Systems modeling , Motor drives ,

    • IEEE Standard for Low-Rate Wireless Networks - Amendment 7: Defining Enhancements to the Smart Utility Network (SUN) Physical Layers (PHYs) Supporting up to 2.4 Mb/s Data Rates 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Enhancements to the IEEE 802.15.4(TM) smart utility network (SUN) orthogonal frequency division multiplexing (OFDM) physical layers (PHYs) that enable support for data rates up to 2.4 Mb/s are defined by this amendment to ...
      Subject(s) : amendment , IEEE 802.15.4 , IEEE 802.15.4x , low data rate , low power , wireless personal area network , WPAN , IEEE Standards , Wireless networks , Physical layer , OFDM , IEEE 802.15 Standard , Smart uility networks ,

    • IEEE Standard for Ethernet Amendment 2: Physical Layer and Management Parameters for Power over Ethernet over 4 pairs 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The maximum Powered Device (PD) power available is increased by this amendment to IEEE Std 802.3-2018 by utilizing all four pairs in the specified structured wiring plant. This represents a substantial change to the ...
      Subject(s) : amendment , DTE power via MDI , Ethernet , IEEE 802.3(TM) , IEEE 802.3bt(TM) , PoE , Power over Ethernet , IEEE Standards , Local area networks , Metropolitan area networks , Ethernet , Physical layer , Power transmission , Power distribution ,

    • IEEE Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal-Enclosed Switchgear -- Corrigendum 1 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This corrigendum corrects an error where the user of this document was directed to gather the wrong column information from the NOAA website for use in calculations. The document erroneously directs the user to read from ...
      Subject(s) : absorption coefficient , finish , IEEE C37.24 , metal-enclosed switchgear , outdoor , solar constant , solar radiation , temperature , IEEE Standards , Solar radiation , Switchgear , Temperature measurement ,

    • IEEE/CSA Standard for Impedance Heating of Pipelines and Equipment - General, Testing, Marking, and Documentation Requirements 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The general requirements, testing, markings, and documentation for impedance heating systems for pipes and equipment intended for use in general industrial applications are provided in this standard. This standard provides ...
      Subject(s) : condensation prevention , heating systems , IEEE 844.3 , CSA C22.2 No. 293.3 , process heating , freeze protection and temperature maintenance , re-melting solidified fluids , impedance heating , thermal insulation , IEEE Standards , CSA Group Standards , Heating systems , Impedance , Maintenance engineering ,

    • IEEE Standard for Local and metropolitan area networks--Part 15.7: Short-Range Optical Wireless Communications 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: A physical layer (PHY) and medium access control (MAC) sublayer for short-range optical wireless communications (OWC) in optically transparent media using light wavelengths from 10 000 nm to 190 nm are defined. The standard ...
      Subject(s) : IEEE 802.15.7 , laser diode , LD , LED , light-emitting diode , OCC , optical camera communications , OWC , short-range optical wireless communications , visible light , visible-light communication , VLC , IEEE Standards , Local area networks , Metropolitan area networks , Visible light communication , Light emitting diodes , Optical fiber communication , Cameras ,

    • IEEE/CSA Standard for Impedance Heating of Pipelines and Equipment - Application Guide for Design, Installation, Testing, Commissioning, and Maintenance 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: An application guide for the design, installation, testing, commissioning, and maintenance of impedance heating systems for pipelines and equipment intended for use in general industrial applications is provided in this ...
      Subject(s) : heating systems , IEEE 844.4TM , CSA C293.4 , process heating , condensation prevention , freeze protection and temperature maintenance , re-melting solidified fluids , impedance heating , thermal insulation , IEEE Standards , Heating systems , Pipelines , Maintenance engineering , Hazardous areas , Impedance , CSA Group Standards ,

    • IEEE Standard for Definitions and Concepts for Dynamic Spectrum Access: Terminology Relating to Emerging Wireless Networks, System Functionality, and Spectrum Management 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Definitions and explanations of key concepts in the fields of spectrum management, spectrum trading, cognitive radio, dynamic spectrum access, policy-based radio systems, software defined radio, and related advanced radio ...
      Subject(s) : cognitive radio , cognitive radio networks , dynamic spectrum access , IEEE 1900.1(TM) , policy-based radio system , software-controlled radio , software-defined radio , spectrum management , spectrum trading , IEEE Standards , Wireless networks , Radio spectrum management , Radio communications ,

    • IEEE Recommended Practice for Power Quality Data Interchange Format (PQDIF) 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: A file format suitable for exchanging power quality related measurement and simulation data in a vendor independent manner is defined in this recommended practice. The format is designed to represent all power quality ...
      Subject(s) : data interchange , file format , IEEE 1159.3 , measurement , monitoring , power quality , PQDIF , IEEE Standards , Power distribution , Power quality , Power measurement , File systems , Information exchange ,

    • IEEE Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Descriptions of products, methods, and procedures relating to stationary batteries, battery electrolyte spill mechanisms, electrolyte containment and control methodologies, and firefighting considerations are provided.
      Subject(s) : active neutralization , battery , battery container , battery room , battery string , battery system , caustic , cell , corrosive , electrolyte , electrolyte release , electrolyte spill , IEEE 1578â„¢ , irritant , lead-acid battery , lithium battery , Ni-Cd battery , passive neutralization , spill containment , spill control , stationary battery system , thermal runaway , toxic , valve-regulated lead-acid (VRLA) battery , vented battery , IEEE Standards , Batteries , Electrolytes , Lead acid batteries , Corrosion , Waste management ,

    • IEEE Guide for Specification of Transmission Static Synchronous Compensator (STATCOM) Systems 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Assisting users in specifying the functional requirements for transmission static synchronous compensator (STATCOM) systems using forced commutated technology based on voltage sourced converter topologies is the purpose ...
      Subject(s) : functional requirements , high voltage power transmission systems , IEEE 1052(TM) , power system compensation , reactive power supply , static synchronous compensator (STATCOM) , static var compensator (SVC) , transient and dynamic stability , voltage regulation , IEEE Standards , Automatic voltage control , Static VAr compensators , Voltage control , Reactive power ,

    • IEEE Standard for Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard provides direction for the design and installation of safety-related electrical cable systems, including associated circuits, in nuclear power generating stations. Also provided is guidance for the design, ...
      Subject(s) : Cable , Generating Facility , Electrical Design , IEEE Standards , Power cables , Nuclear power generation , Industrial facilities ,

    • ISO/IEC/IEEE International Standard - Information technology--Telecommunications and information exchange between systems - Local and metropolitan area networks--Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Modifications to both the IEEE 802.11(TM) physical layer (PHY) and the medium access control (MAC) sublayer to enable operation of license-exempt IEEE 802.11 wireless networks in frequency bands below 1 GHz, excluding the ...
      Subject(s) : IEEE 802.11ah , long transmission range , low power consumption , MAC , medium access control , narrower bandwidth , OFDM , orthogonal frequency division multiplexing , PHY , physical layer , sub 1 GHz , wireless local area network , WLAN , IEEE Standards , IEC Standards , ISO Standards , Information technology , Physical layer , OFDM modulation , Wireless LAN ,

    • IEEE Guide for Specifications of High-Voltage Circuit Breakers (over 1000 V) 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Specifications that apply to all indoor and outdoor types of ac high-voltage circuit breakers rated above 1000 volts are covered in this document. This document is issued only as a guide for use in compiling specifications ...
      Subject(s) : capacitance current switching , circuit breaker , dielectric withstand , fast transient recovery voltage , high-voltage , IEEE Std C37.12(TM) , indoor , initial , interrupting time , manufacturer , mechanical endurance , operating duty , outdoor , power frequency , purchaser , ratings , related capabilities , short-circuit current , short-line fault , specification , IEEE Standards , CIrcuit breakers , High-voltage techniques , Interrupters , Capacitance , Power system transients , Dielectrics ,

    • IEEE Guide for Wireless Access in Vehicular Environments (WAVE) Architecture 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The wireless access in vehicular environments (WAVE) architecture and services necessary for WAVE devices to communicate in a mobile vehicular environment are described in this guide. It is meant to be used in conjunction ...
      Subject(s) : dedicated short range communications , DSRC , IEEE 1609.0(TM) , OBU , onboard unit , Provider Service Identifier (PSID) , roadside unit (RSU) , WAVE , WAVE service advertisement , WAVE Short Message , WAVE Short Message Protocol , wireless access in vehicular environments , WSA , WSM , WSMP , IEEE Standards , Wireless Access in Vehicular Environments , Dedicated short range communication , Wireless communication ,

    • IEEE Recommended Practice for Instruction Manual Content of AC High-Voltage Circuit Breakers above 1000 V 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This recommended practice is intended to identify, organize, and summarize information about ac high-voltage circuit breakers provided by the manufacturer that knowledgeable users will find useful for the receipt, installation, ...
      Subject(s) : circuit breaker , disposal , installation , IEEE C37.12.1(TM) , instruction manual , maintenance , operation , IEEE Standards , High-voltage techniques , Circuit breakers , AC machines , Maintenance engineering , Guidelines ,

    • OV 2110-0:2018 - SMPTE Overview Document - Professional Media over Managed IP Networks Roadmap for the 2110 Document Suite 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The SMPTE 2110 suite of documents defines an extensible system of RTP-based essence streams referenced to a common reference clock, in a manner which specifies their timing relationships. This informative “roadmap†...

    • IEEE Standard Test Procedures for AC High-Voltage Circuit Breakers with Rated Maximum Voltage Above 1000 V 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The testing procedures for all high-voltage circuit breakers that include voltage ratings above 1000 V ac and comprise both indoor and outdoor types having the preferred ratings as listed in IEEE Std C37.04(TM) are covered. ...
      Subject(s) : arcing time , direct test , IEEE C37.09(TM) , mechanical endurance , operating duty , power frequency , short-circuit current , short-line fault , single-phase testing , synthetic test , test data reporting , three-phase testing , transient recovery voltage , unit test , IEEE Standards , Circuit breakers , Short circuits , Power system transients ,