IEEE - The Institute of Electrical and Electronics Engineers, Inc.: Recent submissions

Now showing items 1001-1020 of 2832

    • IEEE Standard for Biometric Open Protocol 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Identity assertion, role gathering, multilevel access control, assurance, and auditing are provided by the Biometric Open Protocol Standard (BOPS). An implementation of the BOPS III spec is described, which includes both ...
      Subject(s) : identification , and liveness. , This standard provides a biometric-agnostic security protocol for authentication ,

    • IEEE Guide for Fault-Locating Techniques on Shielded Power Cable Systems 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Test and measurements, which are performed on shielded power cables to identify the location of a fault, are described. Whenever possible, the limitations of a particular test and measurement to locate a fault are provided ...
      Subject(s) : arc reflection , grounding , time domain reflectometry , IEEE 1234 , (TDR) , safety , sectionalizing , cable fault locating , cable testing , thumping ,

    • IEEE Standard for Metal-Enclosed Switchgear Rated 1 kV to 52 kV Incorporating Gas Insulating Systems 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard covers metal-enclosed switchgear assemblies incorporating gas insulating systems containing, but not limited to, such devices as interrupter switches; selector switches; fuses; circuit breakers; control, ...
      Subject(s) : switchgear , metal-enclosed switchgear incorporating gas insulating systems (MEGIS) , switchgear assembly , metal-enclosed power switchgear ,

    • IEEE Recommended Practice for the Planning and Design of the Microgrid 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The factors that should be taken into account for planning and designing microgrids are covered in this recommended practice. It provides approaches and good practices to be considered in the planning and design, including ...
      Subject(s) : electric energy measurement , safety , scheme evaluation , electrical system design , IEEE 2030.9 , power quality monitoring and control , planning and design , system configuration ,

    • IEEE Guide for the Application of Protective Relaying for Phase-Shifting Transformers 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Protection methods for different types of phase shifting transformers (PST) are provided in this guide, and the interaction between protection and operating conditions of PSTs is discussed. Models representing PSTs to ...
      Subject(s) : series transformer , phase-shifting transformer , application of multifunction relays for transformer protection , IEEE C37.245 , differential protection , overcurrent protection , single-core design , power transfer , dual-core design , advance phase angle , CT saturation , protection of transformers , current transformers , retard phase angle ,

    • IEEE Standard for Ethernet - YANG Data Model Definitions 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard defines YANG modules for various Ethernet devices specified in IEEE Std 802.3. This includes half-duplex and full-duplex data terminal equipment (DTE) using either Carrier Sense Multiple Access / Collision ...
      Subject(s) : YANG. , 802.3 Ethernet ,

    • IEEE/IEC International Standard for TAP-changers --Part 2: Application guidelines 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Subject(s) : IEEE Standards , IEC Standards , TAP changers , Load management ,

    • IEEE Standard Test Procedures for AC High-Voltage Circuit Breakers with Rated Maximum Voltage Above 1000 V - Redline 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The testing procedures for all high-voltage circuit breakers that include voltage ratings above 1000 V ac and comprise both indoor and outdoor types having the preferred ratings as listed in IEEE Std C37.04(TM) are covered. ...
      Subject(s) : arcing time , direct test , IEEE C37.09(TM) , mechanical endurance , operating duty , power frequency , short-circuit current , short-line fault , single-phase testing , synthetic test , test data reporting , three-phase testing , transient recovery voltage , unit test , IEEE Standards , Circuit breakers , High-voltage techniques , Fault diagnosis , AC machines , Testing ,

    • IEEE Guide for Field Testing of Laminated Dielectric, Shielded AC Power Cable Systems Rated 5 kV to 500 kV Using High Voltage Direct Current (HVDC) 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The recommended practices and procedures for direct voltage acceptance and maintenance testing of shielded, laminated, dielectric-insulated power cable systems rated 5 kV to 500 kV are presented in this guide. It applies ...
      Subject(s) : cable , cable installation , cable maintenance , cable tests , field test procedures , HVDC tests , IEEE 400.1(TM) , insulated cable , power cable systems , shielded power cable systems , IEEE Standards , Power cables , Power measurement , Testing , Dielectrics , Lamination , HVDC transmission , Maintenance engineering , Cable insulation ,

    • IEEE Recommended Practice for Power Quality Data Interchange Format (PQDIF) - Redline 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: A file format suitable for exchanging power quality related measurement and simulation data in a vendor independent manner is defined in this recommended practice. The format is designed to represent all power quality ...
      Subject(s) : data interchange , file format , IEEE 1159.3 , measurement , monitoring , power quality , PQDIF , IEEE Standards , Power quality , Power measurement , Data models , Data interchange ,

    • IEEE Standard for Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations - Redline 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This standard provides direction for the design and installation of safety-related electrical cable systems, including associated circuits, in nuclear power generating stations. Also provided is guidance for the design, ...
      Subject(s) : Cable , Generating Facility , Electrical Design , IEEE Standards , Nuclear power generation , Cable installations , Design methodology ,

    • IEEE Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management - Redline 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Subject(s) : active neutralization , battery , battery container , battery room , battery string , battery system , caustic , cell , corrosive , electrolyte , electrolyte release , electrolyte spill , IEEE 1578â„¢ , irritant , lead-acid battery , lithium battery , Ni-Cd battery , passive neutralization , spill containment , spill control , stationary battery system , thermal runaway , toxic , valve-regulated lead-acid (VRLA) battery , vented battery , IEEE Standards , Batteries , Energy management , Electrolytes , Hazards , Pollution control , Industrial pollution ,

    • IEEE Recommended Practice for Seismic Design of Substations - Redline 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Seismic design recommendations for substations, including qualification of different equipment types are discussed. Design recommendations consist of seismic criteria, qualification methods and levels, structural capacities, ...
      Subject(s) : anchorage , conductor , electrical equipment , damping , dynamic analysis , IEEE 693(TM) , loads , projected performance , required response spectrum , seismic protective devices , seismic qualification , shake table , static coefficient analysis , support structure , suspended equipment , time history , IEEE Standards , Substations , Seismic measurement , Electrical equipment , Safety ,

    • IEEE Standard for Definitions and Concepts for Dynamic Spectrum Access: Terminology Relating to Emerging Wireless Networks, System Functionality, and Spectrum Management - Redline 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Definitions and explanations of key concepts in the fields of spectrum management, spectrum trading, cognitive radio, dynamic spectrum access, policy-based radio systems, software defined radio, and related advanced radio ...
      Subject(s) : cognitive radio , cognitive radio networks , dynamic spectrum access , IEEE 1900.1(TM) , policy-based radio system , software-controlled radio , software-defined radio , spectrum management , spectrum trading , IEEE Standards , Terminology , Wireless networks , Spread spectrum management ,

    • IEEE Trial-Use Guide for Surge Protection of DC Power Feeds to Remote Radio Heads - Corrigendum 1 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The title is updated to reflect a trial-use guide and two misspelled names in the participants list and a number in Equation (29) are corrected in this corrigendum.
      Subject(s) : IEEE C62.55(TM) , lightning , powering feed , protection , remote radio head , RRH , SPD , surge protective device , surge waveform , towers , IEEE Standards , Surge protection , Radio communicatoin , Lightning , Power distribution , Remote monitoring ,

    • IEEE/IEC International Standard for Preparation of information for use (instructions for use) of products - Part 1: Principles and general requirements 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Subject(s) : IEEE Standards , IEC Standards , Measurement , Manuals ,

    • IEEE Standard for Qualification of Class 1E Connection Assemblies for Nuclear Power Generating Stations and Other Nuclear Facilities 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Basic requirements, direction, and methods for qualifying Class lE connection assemblies for service in nuclear power generating stations and other nuclear facilities are provided in this standard. These requirements include ...
      Subject(s) : age , age conditioning , aging , baseline parameter , cable , cable assembly , condition monitoring , connection assemblies , connector , equipment qualification , generic qualification , harsh environment , IEEE 572 , interface , margin , mild environment , nuclear , qualification methods , qualified life , radiation , safety-related function , significant aging mechanism , termination , test plan , test sequence , type testing , IEEE Standards , Nuclear power generation , Power system reliability , Aging , Radiation safety , Radiation monitoring ,

    • IEEE Standard for Broadband over Power Line Networks: Medium Access Control and Physical Layer Specifications -- Amendment 1: Enhancement for Internet of Things Applications 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Physical (PHY) and media access control (MAC) layers of a broadband powerline communication technology called flexible channel wavelet PHY/MAC (FCW) for Internet of Things applications (IoTPLC) based on wavelet orthogonal ...
      Subject(s) : extended ISP (E-ISP) , flexible channel wavelet (FCW) PHY/MAC , IEEE 1901a , Internet of Things (IoT) , medium access control (MAC) , physical layer (PHY) , power line communication (PLC) , wavelet orthogonal frequency division multiplexing (wavelet OFDM) , IEEE Standards , Internet of Things , Media Access Protocol , Physical layer , Local area networks , Metropolitan area networks , Power transmission lines , Frequency division multiplexing ,

    • IEEE Guide for the Selection of Monitoring for Circuit Breakers 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Direction is provided for the selection of monitoring and for diagnostic parameters to be used with high-voltage circuit breakers (i.e., above 1000 V). Guidance on appropriate parameters to be considered for monitoring ...
      Subject(s) : failure characteristics , failure modes and effects analysis (FMEA) , failure modes , effects , and criticality analysis (FMECA) , failure rate , high-voltage circuit breakers , IEEE C37.10.1 , monitoring , online condition monitoring , risk assessment , IEEE Standards , Circuit breakers , Failure analysis , Voltage measurement , Condition monitoring , Risk assessment ,

    • IEEE Recommended Practice for Preferred Metric Units for Use in Electrical and Electronics Science and Technology 

      Type: Standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2019
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The preferred metric units for use in Electrical and Electronics Science and Technology is provided by this recommended practice. The application of IEEE/ASTM SI 10 is supported.
      Subject(s) : conversion factors , IEEE 945 , International System , International System of Units , metric practice , metric system , preferred units , SI , SI 10 , Système International d’Unités , IEEE Standards , Electrical equipment industry , Measurement units , International System of Units ,