درباره ما
ISO DIS 10766
Hydraulic fluid power - Cylinders - Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
Organization:
ISO - International Organization for Standardization
Year: 2013
Abstract: This International Standard specifies the preferred range of nominal dimensions and associated tolerances for a series of hydraulic cylinder piston and rod housings for rectangular-section-cut bearing rings, of the type shown in Clause 5, for applications in the following range of dimensions:
- for cylinders with bores of 16 mm to 500 mm, inclusive;
- for rods with diameters of 12 mm to 360 mm, inclusive.
This International Standard does not give details of cut bearing ring design, because the manner of construction of cut bearing rings varies with each manufacturer.
The design material of cut bearing rings is determined by conditions such as the temperature, pressure and side load on the cylinder to which they are fitted.
- for cylinders with bores of 16 mm to 500 mm, inclusive;
- for rods with diameters of 12 mm to 360 mm, inclusive.
This International Standard does not give details of cut bearing ring design, because the manner of construction of cut bearing rings varies with each manufacturer.
The design material of cut bearing rings is determined by conditions such as the temperature, pressure and side load on the cylinder to which they are fitted.
Collections
:
Show full item record
| contributor author | ISO - International Organization for Standardization | |
| date accessioned | 2017-09-04T18:42:04Z | |
| date available | 2017-09-04T18:42:04Z | |
| date copyright | 2013.08.28 | |
| date issued | 2013 | |
| identifier other | JYSDGFAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;query=authoF2377D8669B749A/handle/yse/223608 | |
| description abstract | This International Standard specifies the preferred range of nominal dimensions and associated tolerances for a series of hydraulic cylinder piston and rod housings for rectangular-section-cut bearing rings, of the type shown in Clause 5, for applications in the following range of dimensions: - for cylinders with bores of 16 mm to 500 mm, inclusive; - for rods with diameters of 12 mm to 360 mm, inclusive. This International Standard does not give details of cut bearing ring design, because the manner of construction of cut bearing rings varies with each manufacturer. The design material of cut bearing rings is determined by conditions such as the temperature, pressure and side load on the cylinder to which they are fitted. | |
| language | English | |
| title | ISO DIS 10766 | num |
| title | Hydraulic fluid power - Cylinders - Housing dimensions for rectangular-section-cut bearing rings for pistons and rods | en |
| type | standard | |
| page | 14 | |
| status | Draft | |
| tree | ISO - International Organization for Standardization:;2013 | |
| contenttype | fulltext |