درباره ما
ASTM - ASTM International: Recent submissions
Now showing items 121-140 of 36496
-
Standard Guide for Reporting of Test Performance Data for Oil Spill Response Pumps
Abstract: 4.1 The performance criteria listed in this guide will provide guidance in the selection of oil spill pumping equipment. 4.2 This guide has been developed for use by the following: manufacturers of pumping systems who ... -
Standard Guide for Collecting Performance Data on Temporary Storage Devices
Abstract: 4.1 This guide covers the collection of quantitative data in the form of storage capacity, strength of materials, filling and offloading rates, and towability under controlled test conditions. The data can be used for ... -
Standard Specification for Vegetable Peeling Machines, Electric
Abstract: This specification covers batch-type electric vegetable peeling machines of the following style: Style 1, Size A, and Style 2, Size A, Size B, and Size C. The cylinder or hopper shall be sheet aluminum or stainless steel, ... -
Standard Guide for Selection of Shipboard Incinerators
Abstract: This guide covers selection criteria to assist procurers in selecting the appropriate incinerator for their needs. A number of factors will govern the selection of the size and type of shipboard incinerator and full ... -
Standard Classification for Bank and Mercantile Vault Construction
Abstract: 4.1 This classification is meant to be a guide for the selection of a vault. 4.2 This classification is intended to assist users in availing themselves of various prefabricated and generically constructed products, while ... -
Standard Test Method for Measuring Binocular Disparity in Transparent Parts
Abstract: 5.1 Diplopia or doubling of vision occurs when there is sufficient binocular disparity present so that the bounds of Panum's area (the area of single vision) is exceeded. This condition arises whenever one object is ... -
Standard Guide for Sampling Oil/Water Mixtures for Oil Spill Recovery Equipment
Abstract: 3.1 This guide provides techniques for obtaining representative samples of oil and water mixtures. This information is necessary in the calculation of oil recovery efficiency and oil recovery rates for oil collection ... -
Standard Specification for Doors, Non-Tight, for Marine Use
Abstract: This specification covers the dimensional and mechanical requirements as well as the construction of steel, aluminum, and glass-reinforced plastic (GRP) non-tight, personnel doors and dutch doors for marine use. The door ... -
Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use
Abstract: This specification covers the principal design and type of material for manufacturing fittings for watertight/gastight/airtight, weathertight, and non-tight doors, for marine use. The fittings are intended for use on all ... -
Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
Abstract: This guide covers UNS N08367 and UNS N08926 welded pipe for general corrosion applications. The joints of the specimens shall be double or single welded and full penetration welded made. The welds shall be made either ... -
Standard Guide for Measurement of Rapid Annealing of Neutron-Induced Displacement Damage in Silicon Semiconductor Devices
Abstract: 5.1 Electronic circuits used in many space, military, and nuclear power systems may be exposed to various levels and time profiles of neutron radiation. It is essential for the design and fabrication of such circuits that ... -
Standard Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use
Abstract: This specification covers the principal shapes and dimensions, and mechanical requirements for the manufacture of two types of individually dogged watertight, gastight/airtight, and weathertight doors of steel, aluminum, ... -
Standard Test Method for Measuring Maximum Function Volume of the Primary Dirt
Receptacle in a Vacuum Cleaner Abstract: 3.1 This test method covers a procedure to determine the maximum functional volume of the primary dirt receptacle when installed in the vacuum cleaner. 3.2 This test method provides the maximum amount of test media that ... -
Standard Specification for Doors, Furniture, Marine
Abstract: This specification covers the construction of doors in marine furniture requiring hinged doors. Doors may be flush, right-hand, left-hand, or panel doors. Sheet metal shall be cold-rolled steel, commercial quality, furniture ... -
Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
Abstract: 5.1 Transparent parts, such as aircraft windshields and windows, can be inspected using this practice, and the amount of optical distortion or deviation can be measured. The measurement shall be checked for acceptability ... -
Standard Specification for Polyethylene Plastics for Medical Applications
Abstract: X1.2 Significance X1.2.1 Concentrations of trace metals are measured as extracts in simulated body fluids. The metal’s concentration in extracts is based on the surface area of the plastic extracted from which the total ... -
Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
Abstract: This specification covers the dimensional, design, and performance requirements for five types (Types EB-20, EB-35, DB-60, DB-100, and DB-120) of smooth-wall poly(vinyl chloride) (PVC) conduits and fittings for underground ... -
Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
Abstract: 4.1 Scratches exist on all transparent plastic surfaces. Usually they are very fine scratches from cleaning operations that are not visible when looking through the plastic. Deeper scratches may result from careless cleaning ... -
Standard Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements
Abstract: 4.1 This practice is useful as a screening basis for acceptance or rejection of transparencies during manufacturing so that units with identifiable flaws will not be carried to final inspection for rejection at that time. ... -
Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
Abstract: 4.1 Scratches exist on all glass surfaces. Often there are very fine scratches from cleaning operations that are not visible when looking through the glass. Visible scratches may be distracting to the observer looking ...