DIN EN ISO 26424
English -- Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of the abrasion resistance of coatings by a micro-scale abrasion test (ISO 26424:2008);
German -- Hochleistungskeramik - Bestimmung der Bestaendigkeit gegen Abrieb von Schichten durch eine Mikroabriebpruefung (ISO 26424:2008)
Organization:
DIN - Deutsches Institut fš?r Normung e. V.
Year: 2016
Abstract: Scope: This International Standard specifies a method for measuring the abrasive wear rate of ceramic coatings by means of a micro-scale abrasion wear test based on the well-known crater-grinding technique used for coating thickness determination in ISO 26423 [11]. The method can provide data on both coating and substrate wear rates, either by performing two separate tests or by careful analysis of the data from a single test series. The method can be applied to samples with planar or non-planar surfaces, but the results analysis described in Clause 9 applies only to flat samples. For non-planar samples, a more complicated analysis, possibly requiring the use of numerical methods, is required.
Collections
:
-
Statistics
DIN EN ISO 26424
Show full item record
contributor author | DIN - Deutsches Institut fš?r Normung e. V. | |
date accessioned | 2017-10-18T11:13:15Z | |
date available | 2017-10-18T11:13:15Z | |
date copyright | 2016.11.01 | |
date issued | 2016 | |
identifier other | ECWVSFAAAAAAAAAA.pdf | |
identifier uri | http://yse.yabesh.ir/std;query=author:%22NAVY%20-%20YD%20-%20Naval%20Facilities%20Engineering%20Command%22/handle/yse/236681 | |
description abstract | Scope: This International Standard specifies a method for measuring the abrasive wear rate of ceramic coatings by means of a micro-scale abrasion wear test based on the well-known crater-grinding technique used for coating thickness determination in ISO 26423 [11]. The method can provide data on both coating and substrate wear rates, either by performing two separate tests or by careful analysis of the data from a single test series. The method can be applied to samples with planar or non-planar surfaces, but the results analysis described in Clause 9 applies only to flat samples. For non-planar samples, a more complicated analysis, possibly requiring the use of numerical methods, is required. | |
language | English | |
title | DIN EN ISO 26424 | num |
title | English -- Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of the abrasion resistance of coatings by a micro-scale abrasion test (ISO 26424:2008) | en |
title | German -- Hochleistungskeramik - Bestimmung der Bestaendigkeit gegen Abrieb von Schichten durch eine Mikroabriebpruefung (ISO 26424:2008) | other |
type | standard | |
page | 21 | |
status | Active | |
tree | DIN - Deutsches Institut fš?r Normung e. V.:;2016 | |
contenttype | fulltext |