درباره ما
AIR FORCE - 70 - Air Force Sustainment Center - Ogden: Recent submissions
Now showing items 81-100 of 122
-
MS27999
Abstract: This standard has been approved by the Department of the Air Force and is mandatory for use by that activity. All other military activities are required to employ this standard where suitable. -
MIL-I-9900A
Abstract: This specification covers one type of Photographic interpretation kit, designated Interpretation Kit, Photograph BS-2( ).
The parentheses appearing in the nomenclature will be dropped and replaced by a letter to ... -
MIL-PRF-7726K
Abstract: This specification covers the requirements for a retreaded bias ply or radial ply aircraft tire, which has had a worn casing restored by renewing the tread material or the tread and sidewall material. A rebuilt aircraft ... -
MIL-T-27354B
Abstract: This specification, covers one type of non-medical personnel first aid training aid, designated TAU-41/E. Intended Use: The TAU-41/E training aid is intended to be used for teaching emergency, medical care, ... -
MS22080
Abstract: This military standard is approved for use by all Departments and Agencies of the Department of Defense. Selection for all new engineering and design applications and for repetitive use shall be made from this document, ... -
MIL-D-004179C
Abstract: This specification covers one type of electrically heated film drier for drying 16mm and 35mm motion picture roll film, designated Type C-2A. Intended Use: The drier covered by this specification is intended ... -
MS21444
Abstract: This military standard is approved for use by the Department of the Air Force, and is available for use by all Departments and Agencies of the Departments of Defense.
The Tire Shall Be In Accordance With The Applicable ... -
MIL-P-4278C
Abstract: This specification covers one type of fixed focus automatic enlarging printer for printing 35 millimeter single frame, 70 millimeter, and 5-inch roll negatives, designated Type E-l. The printer is intended for use in both ...