درباره ما
DIN EN ISO 18752
English -- Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2014);
German -- Gummischlaeuche und -schlauchleitungen - Draht- oder textilverstaerkte Einzeldrucktypen fuer hydraulische Anwendungen - Anforderungen (ISO 18752:2014)
Organization:
DIN - Deutsches Institut fš?r Normung e. V.
Year: 2016
Abstract: Scope: This International Standard specifies requirements for ten classes, four grades and seven types of wireor textile-reinforced hydraulic hoses and hose assemblies of nominal sizes ranging from 5 to 102. Each class has a single maximum working pressure for all sizes. Such hoses are suitable for use with hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from –40 °C to +100 °C for types AS, AC, BS and BC and –40 °C to +120 °C for types CS, CC and DC. This International Standard does not include requirements for the connection ends. It is limited to the performance of hoses and hose assemblies. The hose assembly maximum working pressure is governed by the lowest maximum working pressure of the components. NOTE It is the responsibility of the user, in consultation with the hose manufacturer, to establish the compatibility of the hose with the fluid to be used
Collections
:
-
Statistics
DIN EN ISO 18752
Show full item record
| contributor author | DIN - Deutsches Institut fš?r Normung e. V. | |
| date accessioned | 2017-10-18T11:11:07Z | |
| date available | 2017-10-18T11:11:07Z | |
| date copyright | 2016.11.01 | |
| date issued | 2016 | |
| identifier other | YOZOSFAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;quess=autho1216AF679DDCAC4/handle/yse/236132 | |
| description abstract | Scope: This International Standard specifies requirements for ten classes, four grades and seven types of wireor textile-reinforced hydraulic hoses and hose assemblies of nominal sizes ranging from 5 to 102. Each class has a single maximum working pressure for all sizes. Such hoses are suitable for use with hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from –40 °C to +100 °C for types AS, AC, BS and BC and –40 °C to +120 °C for types CS, CC and DC. This International Standard does not include requirements for the connection ends. It is limited to the performance of hoses and hose assemblies. The hose assembly maximum working pressure is governed by the lowest maximum working pressure of the components. NOTE It is the responsibility of the user, in consultation with the hose manufacturer, to establish the compatibility of the hose with the fluid to be used | |
| language | English | |
| title | DIN EN ISO 18752 | num |
| title | English -- Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2014) | en |
| title | German -- Gummischlaeuche und -schlauchleitungen - Draht- oder textilverstaerkte Einzeldrucktypen fuer hydraulische Anwendungen - Anforderungen (ISO 18752:2014) | other |
| type | standard | |
| page | 24 | |
| status | Active | |
| tree | DIN - Deutsches Institut fš?r Normung e. V.:;2016 | |
| contenttype | fulltext |