درباره ما
ASME - ASME International: Recent submissions
Now showing items 401-420 of 1083
-
ASME A112.19.3
Abstract: This standard shall cover the requirements for fire hose appliances up to and including 150 mm (6 in.) nominal dimension designed for connection to fire hose, fire apparatus, and fire hydrants and intended for general fire ... -
ASME B89.4.19
Abstract: This Standard prescribes methods for the performance evaluation of laser-based spherical coordinate measurement systems and provides a basis for performance comparisons among such systems. Definitions, environmental ... -
ASME B89.1.6
Abstract: This Standard is intended to establish uniform practices for the measurement of master rings or ring gages using horizontal methods. The standard includes requirements for geometric qualities of master rings or ring ... -
ASME B47.1
Abstract: This Standard covers standard designs for the following:
(a) plain and thread plug gage blanks to 12.010 in. maximum gaging diameter
(b) plain and thread ring gage blanks to 12.260 in. maximum gaging diameter
(c) ... -
ASME B16.1
Abstract: This Standard covers Classes 25, 125, and 250 Gray Iron Pipe Flanges and Flanged Fittings. It includes
(a) pressure–temperature ratings
(b) sizes and method of designating openings of reducing fittings
(c) ... -
ASME B94.9
Abstract: This Standard covers various designs of standard taps, nomenclature, and definitions; the standard system of marking; and dimensions and tolerance tables for the types and styles of taps. -
ASME B5.10
Abstract: Object and Scope
This Standard establishes (1) American standard practice for the slope of self-holding and steep machine tapers, (2) the detailed dimensions for this type of taper tool shank, (3) the ... -
ASME B16.34 INTERPRETATIONS
Abstract: Scope:
As a service to persons who use the B16 standards, B16 Committee renders interpretations of the requirements upon request. The procedure for requesting an interpretation ... -
ASME MFC-12M
Abstract: This Standard, provides information on the use of multiport averaging Pitot head-type devices used to measure liquids and gases. The Standard applies when the conduits are full and the flow
(a) has a fully developed ... -
ASME B30.19
Abstract: The ASME B30 Standard contains provisions that apply to the construction, installation, operation, inspection, testing, maintenance, and use of cranes and other lifting and material-movement related equipment. For the ... -
ASME B29.2M
Abstract: FOREWORD
Preparatory work during the late 1930s and early 1940s by the Silent Chain Division of the Association of Roller and Silent Chain Manufacturers (ARSCM, now the American Chain Association) ... -
ASME Y14.1
Abstract: This Standard defines decimal inch sheet sizes and formats for engineering drawings. Metric sheet sizes and format are defined in ASME Y14.1M. For engineering drawing preparation and practices, see ASME Y14.100. ... -
ASME B89.7.2
Abstract: Objective
The objective of this Standard is to ensure correctness and acceptability of dimensional measurements.
Requirements
This Standard specifies requirements for preparation and approval ... -
ASME B30.24
Abstract: Volume B30.24 includes provisions that apply to the construction, installation, operation, inspection, testing, and maintenance of container cranes used for lifting purposes, in conjunction with equipment described in other ... -
ASME HST-4
Abstract: (a) This Standard establishes performance requirements for electric wire rope hoists for vertical lifting service involving material handling of freely suspended (unguided) loads using wire rope with one of the following ... -
ASME HRT-1
Abstract: This Standard provides requirements for the design and use of hoisting, rigging, and transporting equipment used in the delivery of nuclear facility components to a nuclear facility’s point of receipt and the handling ... -
ASME STP-NU-019-1
Abstract: ABSTRACT
Part I Base Metal The database for the creep-rupture of 9Cr-1Mo-V (Grade 91) steel was collected and reviewed to determine if it met the needs for recommending time-dependent strength values, ... -
ASME B1.11
Abstract: This standard covers the screw thread used for mounting the objective assembly to the body or lens turret of microscopes. It is based on, and intended to be interchangeable with, the screw thread introduced and adopted ... -
ASME MFC-21.2
Abstract: This Standard establishes common terminology and gives guidelines for the quality, description, principle of operation, selection, installation, and flow calibration of thermal dispersion flowmeters for the measurement of ... -
ASME A112.4.1
Abstract: This Standard establishes performance requirements and test methods applicable to water heater relief valve drain (or runoff) tubes for use with relief valves having a steam rating of 105,000 Btu/hr or less.