MIL-PRF-62365C

Abstract

This specification describes one type of hydraulic motor used in a launcher erection drive system on a military ground vehicle. <br>The documents listed in this section are specified in sections <a>3</a> and <a>4</a> of this specification. This section does not include documents in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirement documents cited in sections 3 and 4 of this specification, whether or not they are listed. <strong>Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: US Army Tank-automotive and Armaments Command, ATTN: AMSTA-TR-E/BLUE, Warren, MI 48397-5000, by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document, or by letter</strong> <br>The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation (see <a>6.2</a>). </span><pre> SPECIFICATIONS DEPARTMENT OF DEFENSE <cite>MIL-PRF-6083</cite> - Hydraulic Fluid, Petroleum Base, For Preservation and Operation. STANDARDS DEPARTMENT OF DEFENSE <cite>MIL-STD-810</cite> - Environmental Test Methods and Engineering Guidelines.</pre> <br> <br>(Unless otherwise indicated, copies of the above specifications and standards are available from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) <br>The following other Government documents, drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified, the issues are those cited in the solicitation. <pre> DRAWINGS DEPARTMENT OF DEFENSE 12265504 - Motor Assembly, Hydraulic, Erection Drive (Interface).</pre> <br> <br>(Copies of these drawings are available from the U.S. Army Tank-automotive and Armaments Command, ATTN: AMSTA-TR-E/BLUE, Warren, MI 48397-5000.) <br>The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of the documents which are DoD adopted are those listed in the issue of the DoDISS cited in the solicitation. Unless otherwise specified, the issues of documents not listed in the DoDISS are the issues of the documents cited in the solicitation (see <a>6.2</a>). <pre> AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI) <cite>ANSI/SAE AS478</cite> - Identification and Marking Methods (DoD Adopted).</pre> <br> <br>(Application for copies may be obtained from the American National Standards Institute, 11 West 42nd Street, New York, NY 10036.) <pre> AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) <cite>ASTM B633</cite> - Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel (DoD Adopted). <cite>ASTM B650</cite> - Standard Specification for Electrodeposited Engineering Chromium Coating for Ferrous Substrates (DoD Adopted).</pre> <br> <br>(Application for copies may be obtained from the American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, PA 19428-2959.) <pre> SOCIETY OF AUTOMOTIVE ENGINEERS, INC. (SAE) <cite>SAE AS1933</cite> - Age Controls for Hose Containing Age-Sensitive Elastomeric Materials (DoD Adopted).</pre> <br> <br>(Application for copies may be obtained from the Society of Automotive Engineers, Inc., 400 Commonwealth Drive, Warrendale, PA 15096.) <br>In the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. <br><b><u>Intended Use:</u></b> The hydraulic motor will be utilized in the M901A1 improved tow vehicle launcher erection drive system. <br>