درباره ما
ITU-T X.24
LIST OF DEFINITIONS FOR INTERCHANGE CIRCUITS BETWEEN DATA TERMINAL EQUIPMENT (DTE) AND DATA CIRCUIT-TERMINATING EQUIPMENT (DCE) ON PUBLIC DATA NETWORKS
Year: 1988
Abstract: This Recommendation applies to the functions of the interchange circuits provided at the interface between DTE and DCE of data networks for the transfer of binary data, call control signals and timing signals.
For any type of practical equipment, a selection will be made from the range of interchange circuits defined in this Recommendation, as appropriate. The actual interchange circuits to be used in a particular DCE for a user class of service according to Recommendation X.1 and defined user facilities according to Recommendation X.2, are those indicated in the relevant Recommendation for the procedural characteristics of the interface, e.g., Recommendation X.20 or X.21.
To enable a standard DTE to be developed, the use and termination by the DTE of certain circuits even when implemented in the DCE are not mandatory. This is covered by the individual interface Recommendations.
The interchange circuits defined for the transfer of binary data are also used for the exchange of call control signals.
The electrical characteristics of the interchange circuits are detailed in the appropriate Recommendation for electrical characteristics of interchange circuits. The application of those characteristics for a particular DCE is specified in the Recommendation for the procedural characteristics of the interface.
The range of interchange circuits defined in this Recommendation is applicable to the range of services which could be offered on a public data network, e.g., circuit switching services (synchronous and start/stop), telex service, packet switching services, message registration and retransmission service and facsimile service.
For any type of practical equipment, a selection will be made from the range of interchange circuits defined in this Recommendation, as appropriate. The actual interchange circuits to be used in a particular DCE for a user class of service according to Recommendation X.1 and defined user facilities according to Recommendation X.2, are those indicated in the relevant Recommendation for the procedural characteristics of the interface, e.g., Recommendation X.20 or X.21.
To enable a standard DTE to be developed, the use and termination by the DTE of certain circuits even when implemented in the DCE are not mandatory. This is covered by the individual interface Recommendations.
The interchange circuits defined for the transfer of binary data are also used for the exchange of call control signals.
The electrical characteristics of the interchange circuits are detailed in the appropriate Recommendation for electrical characteristics of interchange circuits. The application of those characteristics for a particular DCE is specified in the Recommendation for the procedural characteristics of the interface.
The range of interchange circuits defined in this Recommendation is applicable to the range of services which could be offered on a public data network, e.g., circuit switching services (synchronous and start/stop), telex service, packet switching services, message registration and retransmission service and facsimile service.
Show full item record
| contributor author | ITU-T - International Telecommunication Union/ITU Telcommunication Sector | |
| date accessioned | 2017-09-04T18:33:54Z | |
| date available | 2017-09-04T18:33:54Z | |
| date copyright | 1988.11.01 | |
| date issued | 1988 | |
| identifier other | JFDBSCAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;quessioutho4703177793325273135A68A10958014/handle/yse/216078 | |
| description abstract | This Recommendation applies to the functions of the interchange circuits provided at the interface between DTE and DCE of data networks for the transfer of binary data, call control signals and timing signals. For any type of practical equipment, a selection will be made from the range of interchange circuits defined in this Recommendation, as appropriate. The actual interchange circuits to be used in a particular DCE for a user class of service according to Recommendation X.1 and defined user facilities according to Recommendation X.2, are those indicated in the relevant Recommendation for the procedural characteristics of the interface, e.g., Recommendation X.20 or X.21. To enable a standard DTE to be developed, the use and termination by the DTE of certain circuits even when implemented in the DCE are not mandatory. This is covered by the individual interface Recommendations. The interchange circuits defined for the transfer of binary data are also used for the exchange of call control signals. The electrical characteristics of the interchange circuits are detailed in the appropriate Recommendation for electrical characteristics of interchange circuits. The application of those characteristics for a particular DCE is specified in the Recommendation for the procedural characteristics of the interface. The range of interchange circuits defined in this Recommendation is applicable to the range of services which could be offered on a public data network, e.g., circuit switching services (synchronous and start/stop), telex service, packet switching services, message registration and retransmission service and facsimile service. | |
| language | English | |
| title | ITU-T X.24 | num |
| title | LIST OF DEFINITIONS FOR INTERCHANGE CIRCUITS BETWEEN DATA TERMINAL EQUIPMENT (DTE) AND DATA CIRCUIT-TERMINATING EQUIPMENT (DCE) ON PUBLIC DATA NETWORKS | en |
| type | standard | |
| page | 8 | |
| status | Active | |
| tree | ITU-T - International Telecommunication Union/ITU Telcommunication Sector:;1988 | |
| contenttype | fulltext |