درباره ما
Search
CSV
RISAWS CAWF: Characterization of Arc Welding Fume
Abstract: Introduction
During the process of welding, metal vapors are produced in the electric arc. As these vapors cool and solidify, a fume is formed that may be a potential health hazard to the welder and to others working in the same area. Such fine aerosols are all irritating to the respiratory system. Yet some fumes may potentially...
During the process of welding, metal vapors are produced in the electric arc. As these vapors cool and solidify, a fume is formed that may be a potential health hazard to the welder and to others working in the same area. Such fine aerosols are all irritating to the respiratory system. Yet some fumes may potentially...
AWS B5.9: Specification for the Qualification of Welding Supervisors
Abstract: This standard establishes requirements for the qualification of Welding Supervisors. It describes how personnel are qualified, the principles of conduct, and the practice by which qualification may be maintained.
This specification does not address all safety issues associated with welding. It is the responsibility of the employer to establish ...
This specification does not address all safety issues associated with welding. It is the responsibility of the employer to establish ...
AWS F1.5M: Methods for Sampling and Analyzing Gases from Welding and Allied Processes
Abstract: This publication includes the recommended procedures for sampling and methods of analysis for gases that may be formed during the use of various welding and allied processes. These gases include the following:
(1) Ozone ...
(1) Ozone ...
AWS B2.1-5A-223: Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), E9018-B3, 1/8 through 1/2 in. Thick, As-Welded Condition; 1/8 through 1-1/2 in. Thick, PWHT Condition, Primarily Pipe Applications Site License - 1st Edition
Abstract: The data to support this Standard Welding Procedure Specification (SWPS) were derived from the above-listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding Research ...
AWS FMC: Filler Metal Comparison Charts
Abstract: Abstract
More than 80 producers and marketers of filler metals have supplied trade names of thousands of products conforming to AWS filler metal classifications. Products are tabulated by filler metal ...
More than 80 producers and marketers of filler metals have supplied trade names of thousands of products conforming to AWS filler metal classifications. Products are tabulated by filler metal ...
AWS QC20: Specification for AWS Certification of Resistance Welding Technicians - 1st Edition
Abstract: This specification establishes the requirements for AWS certification of resistance welding technicians. It describes how personnel are certified, and the principles of conduct and practice by which certification may be maintained. Any oral or written claim of certification under the guidelines established herein shall be made only by those individ...
AWS B2.1-1-211: Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Insert Root Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S- 1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick INMs-1, ER70S-2, and E7018, As-Welded or PWHT Condition, Primarily Pipe Applications
Abstract: The data to support this Standard Welding Procedure Specification (WPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding ...
AWS A5.1/A5.1M: Specification for Carbon Steel Electrodes for Shielded Metal ArcWelding - 14th Edition
Abstract: This specification prescribes requirements for the classification of carbon steel electrodes for shielded metal arc welding.
Safety and health issues and concerns are beyond the scope of this standard and, therefore, are not fully addressed herein. Some safety and health information can be found in Informative Annex Clauses A5 and A10. Safety a...
Safety and health issues and concerns are beyond the scope of this standard and, therefore, are not fully addressed herein. Some safety and health information can be found in Informative Annex Clauses A5 and A10. Safety a...
AWS B2.1-1-234: Standard Welding Procedure Specification (SWPS) for Argon plus 25% Carbon Dioxide Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Groups 1 and 2), 1/8 through 1-1/2 inch Thick, E7XT-X, As-Welded or PWHT Condition, Primarily Pipe Applications
Abstract: The data to support this Standard Welding Procedure Specification (SWPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding ...