درباره ما
AWS B2.1-1-211
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Insert Root Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S- 1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick INMs-1, ER70S-2, and E7018, As-Welded or PWHT Condition, Primarily Pipe Applications
Organization:
AWS - American Welding Society
Year: 2001
Abstract: The data to support this Standard Welding Procedure Specification (WPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding Research Council. This Standard WPS is not valid using conditions and variables outside the ranges listed. The American Welding Society considers that this Standard WPS presents information for producing an acceptable weld using the conditions and variables listed. The user needs a significant knowledge of welding and accepts full responsibility for the performance of the weld and for providing the engineering capability, qualified personnel, and proper equipment to implement this Standard WPS.
Subject: allowable joint designs
Collections
:
Show full item record
| contributor author | AWS - American Welding Society | |
| date accessioned | 2017-09-04T17:13:35Z | |
| date available | 2017-09-04T17:13:35Z | |
| date copyright | 01/01/2001 | |
| date issued | 2001 | |
| identifier other | YYLEUAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/137041 | |
| description abstract | The data to support this Standard Welding Procedure Specification (WPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding Research Council. This Standard WPS is not valid using conditions and variables outside the ranges listed. The American Welding Society considers that this Standard WPS presents information for producing an acceptable weld using the conditions and variables listed. The user needs a significant knowledge of welding and accepts full responsibility for the performance of the weld and for providing the engineering capability, qualified personnel, and proper equipment to implement this Standard WPS. | |
| language | English | |
| title | AWS B2.1-1-211 | num |
| title | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Insert Root Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S- 1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick INMs-1, ER70S-2, and E7018, As-Welded or PWHT Condition, Primarily Pipe Applications | en |
| type | standard | |
| page | 22 | |
| status | Active | |
| tree | AWS - American Welding Society:;2001 | |
| contenttype | fulltext | |
| subject keywords | allowable joint designs | |
| subject keywords | base metal | |
| subject keywords | carbon steel | |
| subject keywords | consumable insert | |
| subject keywords | filler metal | |
| subject keywords | gas tungsten arc welding | |
| subject keywords | manual welding | |
| subject keywords | shielded metal arc welding | |
| subject keywords | Welding Procedure Specification |