Defence Standards: Recent submissions

Now showing items 481-500 of 43216

    • MIL-DTL-11132/50 NOTICE 2 

      Type: standard
      Source: ARMY - IH - Institute of Heraldry:;2001
      Organization : ARMY - IH - Institute of Heraldry

    • COMDTINST 16114.20 

      Type: standard
      Source: USCG - United States Coast Guard:;2001
      Organization : USCG - United States Coast Guard
      Abstract: PURPOSE.
      This Instruction establishes the Coast Guard's strategic vision and plan with which the current shore-based response boat system will be transitioned to a more effective system of standardized shore-based ...

    • MIL-PRF-7254G 

      Type: standard
      Source: AIR FORCE - 05 - SAF/AQR Deputy Assistant Secretary (Science, Technology and Engineering):;1997
      Organization : AIR FORCE - 05 - SAF/AQR Deputy Assistant Secretary (Science, Technology and Engineering)
      Abstract: This specification covers the requirements for four types of nitric acid propellant.
      The nitric acid will be of the following types as specified (6.2):
      The types of nitric acid are as follows: 
           ...
      Subject(s) : Hydrofluoric acid , IRFNA , Missile propellant , Nitric acid , Nitrogen dioxide , Oxidizer , Rocket engines ,

    • A-A-59326/10B 

      Type: standard
      Source: ARMY - AT - Tank-Automotive and Armaments Command:;2011
      Organization : ARMY - AT - Tank-Automotive and Armaments Command
      Abstract: This specification covers a Coupling Half Dust Cap, Type IX to be used in conjunction with a male type cam lock coupling half.

    • MIL-PRF-19500/486H 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2011
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This specification covers the performance requirements for solid state optically coupled isolators in which a gallium aluminum arsenide diode light source is optically coupled to a silicon NPN phototransistor. Four levels ...

    • DSCC-VID-V62/04643 REV A 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2010
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents the general requirements of a high performance LVDS serdes (serializer/deserializer) transmitter microcircuit, with an operating temperature range of -40°C to +85°C.

    • A-A-55812 VALID NOTICE 3 

      Type: standard
      Source: DLA - GS8 - DLA Aviation - Richmond:;2013
      Organization : DLA - GS8 - DLA Aviation - Richmond

    • MIL-S-11874D NOTICE 3 

      Type: standard
      Source: ARMY - IH - Institute of Heraldry:;1998
      Organization : ARMY - IH - Institute of Heraldry

    • MIL-DTL-21617/5 VALID NOTICE 1 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2008
      Organization : DLA - CC - DLA Land and Maritime

    • MIL-DTL-17/151A VALID NOTICE 1 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2012
      Organization : DLA - CC - DLA Land and Maritime

    • MIL-C-22520/1C 

      Type: standard
      Source: NAVY - AS - Naval Air Systems Command:;1976
      Organization : NAVY - AS - Naval Air Systems Command
      Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
      The complete requirements for procuring the crimping tools described herein shall consist of this document ...

    • MIL-I-24718/2 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1990
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
      The requirements for acquiring the product described herein shall consist of this specification sheet and the issue ...

    • MIL-DTL-11484/251 NOTICE 2 

      Type: standard
      Source: ARMY - IH - Institute of Heraldry:;2001
      Organization : ARMY - IH - Institute of Heraldry

    • GGG-P-61A 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;1966
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This specification covers precision-ground, hardened steel, and cast-iron parallels for use in supporting work in inspection, layout, and general machine-shop practice.
      This specification does not cover all types of ...

    • DSCC-VID-V62/04683 REV A 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2010
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents the general requirements of a high performance quadruple bus buffer gate with 3-state outputs microcircuit, with an operating temperature range of -40°C to +125°C.

    • NASA-LLIS-0684 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;2000
      Organization : NASA - National Aeronautics and Space Administration (NASA)

    • NACA-RM-A8D02 

      Type: standard
      Source: NASA - National Aeronautics and Space Administration (NASA):;1949
      Organization : NASA - National Aeronautics and Space Administration (NASA)
      Abstract: INTRODUCTION
      The theory developed in reference 1 indicates that aircraft employing wings of high sweepback and high aspect ratio should be capable of efficient flighty (L/D =10) at moderate supersonic Mach numbers. To ...

    • DODD 5000.60-H 

      Type: standard
      Source: DODD - DoD Directives Service:;1996
      Organization : DODD - DoD Directives Service

    • MIL-T-19646A 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1990
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification covers environmentally hardened thermometers which utilize an elastic element to measure the pressure within a gas filled closed system (thermal system) and convert this pressure to an analog temperature ...
      Subject(s) : Sensor , System , filled , System , thermal ,

    • MIL-B-70838 

      Type: standard
      Source: ARMY - AR - US Army Research Devlp & Engr Command, Armament Research Devlp & Engr Center:;1989
      Organization : ARMY - AR - US Army Research Devlp & Engr Command, Armament Research Devlp & Engr Center
      Abstract: This specification establishes the requirements, quality assurance provisions and preparation for delivery of depleted uranium billets. Intended Use: The billets covered by this specification are intended ...
      Subject(s) : Abrams Heavy Armor , Casting , Ingot , Low Specific Activity , M1A1 Abrams Main Battle Tank ,